كورس رسم علبة مصنوعة بالطباعة ثلاثية الأبعاد باستخدام برنامج فيوجن 360 – Fusion 360 3D Printed Product Enclosure Course

كورس رسم علبة مصنوعة بالطباعة ثلاثية الأبعاد باستخدام برنامج فيوجن 360 – Fusion 360 3D Printed Product Enclosure Course
اسم المؤلف
غير معروف
التاريخ
5 نوفمبر 2021
المشاهدات
220
التقييم
(لا توجد تقييمات)
Loading...

كورس رسم علبة مصنوعة بالطباعة ثلاثية الأبعاد باستخدام برنامج فيوجن 360
Fusion 360 3D Printed Product Enclosure Course
1.Introduction
2.1. Set Up
3.2. Insert and Position Components
4.3. Model Enclosure Base
5.4. Model Enclosure Cover
6.Conclusion
Exercise Files
1.Introduction \ 01.Welcome
1.Introduction \ 02.Parts
2.1. Set Up \ 03.Download Fusion 360
2.1. Set Up \ 04.Change settings
2.1. Set Up \ 05.Upload the exercise files
3.2. Insert and Position Components \ 06.Insert parts into current design
3.2. Insert and Position Components \ 07.Modifying a linked component
3.2. Insert and Position Components \ 08.Review of the layout
3.2. Insert and Position Components \ 09.Move and align the charger into position
3.2. Insert and Position Components \ 10.Model standoffs for the charger
3.2. Insert and Position Components \ 11.Model standoffs, continued
3.2. Insert and Position Components \ 12.Align and position components
4.3. Model Enclosure Base \ 13.Housing for the slide switch
4.3. Model Enclosure Base \ 14.Model circuit playground platforms
4.3. Model Enclosure Base \ 15.Modify and mirror platforms
4.3. Model Enclosure Base \ 16.Secure the battery
4.3. Model Enclosure Base \ 17.3D print and check fit
4.3. Model Enclosure Base \ 18.Modify standoffs
4.3. Model Enclosure Base \ 19.Modify the slide switch and housing
4.3. Model Enclosure Base \ 20.Modify battery constraints
4.3. Model Enclosure Base \ 21.Modify battery constraints, continued
4.3. Model Enclosure Base \ 22.3D print and check new fit
5.4. Model Enclosure Cover \ 23.Design the cover and shell
5.4. Model Enclosure Cover \ 24.Cutouts for LEDs and ports
5.4. Model Enclosure Cover \ 25.Cutout for the slide switch
5.4. Model Enclosure Cover \ 26.Cutout for the battery charger
5.4. Model Enclosure Cover \ 27.Assembly
6.Conclusion \ 28.Next steps

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net

تحميل

يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول

التعليقات

اترك تعليقاً