Engineering Graphics with SOLIDWORKS 2023

Engineering Graphics with SOLIDWORKS 2023
A Step-by-Step Project Based Approach
David C. Planchard
CSWP & SOLIDWORKS Accredited Educator
TABLE OF CONTENTS
Introduction I-1
About the Author I-2
Dedication I-4
Contact the Author I-4
Note to Instructors I-4
Trademarks, Disclaimer and Copyrighted Material I-4
References I-5
Table of Contents I-6
Overview of Chapters I-16
Chapter 1: History of Engineering Graphics I-16
Chapter 2: Isometric Projection and Multi View Drawings I-16
Chapter 3: Dimensioning Practices, Scales, Tolerancing and Fasteners I-17
Chapter 4: Overview of SOLIDWORKS and the User Interface I-18
Chapter 5: Introduction to SOLIDWORKS Part Modeling I-18
Chapter 6: Revolved Boss/Base Features I-19
Chapter 7: Swept, Lofted, Rib, Mirror and Additional Features I-19
Chapter 8: Assembly Fundamentals – Bottom-up method I-19
Chapter 9: Fundamentals of Drawing I-20
Chapter 10: Certified SOLIDWORKS Associate – Mechanical Design exam (CSWA) I-20
Chapter 11: Additive Manufacturing – 3D printing fundamentals I-21
About the Book I-22
Windows Terminology in SOLIDWORKS I-23
Chapter 1 – History of Engineering Graphics 1-1
Chapter Overview 1-3
History of Engineering Graphics 1-3
Global and Local Coordinate System 1-6
2-Dimensional Cartesian Coordinate System 1-7
3-Dimensional Cartesian Coordinate System 1-8
Absolute Coordinates 1-10
Relative Coordinates 1-10
Polar Coordinates 1-11
Cylindrical and Spherical Coordinates 1-11
Freehand Sketching 1-12
General Sketching Techniques 1-13
Geometric Entities 1-14
Points 1-14
Lines 1-14
Planes 1-15
Circles 1-15
Arcs 1-16
Solid Primitives 1-16
Alphabet of Lines 1-17
Visible lines 1-17
Hidden lines 1-17
Dimension lines 1-18
Extension lines 1-18Engineering Graphics with SOLIDWORKS® 2023 Introduction
PAGE I – 7
Leader lines 1-19
Break lines 1-20
Centerlines 1-20
Phantom lines 1-21
Section lines 1-21
Cutting Plane lines 1-22
Precedence of Line Types 1-23
Alphabet of Lines Exercises 1-25
Projections in General 1-27
Projection Types 1-29
Parallel Projection 1-29
Perspective Projection 1-29
Orthographic Projection 1-29
Oblique Projection 1-29
Multi-view Projection 1-30
Orient and Select the Front View 1-30
Orthographic Projection (Third Angle) 1-31
Glass Box and Six Principle Orthographic Views 1-32
Height, Width and Depth Dimensions 1-35
Transferring Dimensions 1-35
Sheet Media 1-36
ANSI Standard Sheet Sizes 1-36
Orthographic Projection Exercises 1-37
Planes (Normal, Inclined and Oblique) 1-42
Plane Exercises 1-43
Chapter Summary 1-49
Questions/Exercises 1-51
Chapter 2 – Isometric Projection and Multi View Drawings 2-1
Chapter Overview 2-3
Isometric Projections 2-3
Isometric Sketching 2-5
Circles Drawn in Axonometric View 2-7
Additional Projections 2-9
Oblique Projection 2-9
Arrangement of Views 2-13
Two View Drawing 2-14
One View Drawing 2-16
Drawing – Exercises 2-19
Drawing Views – Advanced 2-21
Section View 2-21
Detail View 2-23
Broken out View 2-24
Break or Broken View 2-25
Crop View 2-26
Auxiliary View 2-27
Exercises 2-27
History of Computer Aided Design (CAD) 2-28
Boolean Operations 2-29
What is SOLIDWORKS? 2-31
Design Intent 2-33Introduction Engineering Graphics with SOLIDWORKS® 2023
PAGE I – 8
Design Intent in a Sketch 2-33
Design Intent in a Feature 2-34
Design Intent in a Part 2-34
Design Intent in an Assembly 2-35
Design Intent in a Drawing 2-35
Chapter Summary 2-36
Questions/Exercises 2-37
Chapter 3 – Dimensioning Practices, Scales, Tolerancing and Fasteners 3-1
Chapter Overview 3-3
American National Standards Institute (ANSI) 3-3
Dimensioning 3-4
Location Dimension 3-4
Size Dimension 3-4
Measurement – units 3-5
Metric/SI 3-5
English 3-5
Dual Dimensioning 3-6
Scale 3-7
Architect’s Scale 3-7
Engineer’s Scale 3-7
Linear Encoder 3-7
Linear Scale 3-7
Vernier Scale 3-7
Standards for Dimensioning 3-8
Linear Dimension 3-8
Stagger Dimension 3-8
Aligned Dimension 3-9
Angular Dimension 3-9
Chamfer Dimension 3-10
Slot Dimension 3-10
Radius Dimension (Leader line) 3-11
Simple Hole Dimension (Leader line) 3-12
Fastener Hole Dimension (Annotations) 3-13
Cylindrical Dimension 3-13
Equally Spaced Hole Dimension 3-15
Hole Dimension Location 3-15
Point/Center of a Circle Dimension 3-16
Arc Dimension 3-16
Order of Preference – Linear Dimension Line 3-17
Precision 3-17
Size Dimension 3-18
Continuous Dimensions 3-19
Principles of good Dimensioning 3-20
Precision and Tolerance 3-26
Tolerance for a Drawing 3-27
General Tolerance – Title Block 3-27
Local Tolerance – Dimension 3-28
Limit Tolerance 3-28
Unilateral Tolerance 3-29
Bilateral Tolerance 3-29Engineering Graphics with SOLIDWORKS® 2023 Introduction
PAGE I – 9
Formatting Inch Tolerances 3-29
Metric Dimension Specifications 3-30
Tolerance Parts and Important Terms 3-30
Fit – Hole Tolerance 3-32
Fit Types between Mating Parts 3-32
Clearance Fit 3-33
Interference Fit 3-33
Transition Fit 3-33
Fasteners in General 3-34
Representing External (Male) Threads 3-37
Cutting External (Male) Threads 3-38
Die 3-38
Lathe 3-38
Representing Internal (Female) Threads 3-39
Cutting Internal (Female) Threads 3-39
Taper 3-40
Plug 3-40
Bottoming 3-40
American National Standard and Unified Screw Threads 3-41
Single vs. Double or Triple Threads 3-41
Pitch and Major Diameter 3-42
Thread Class of Fit 3-42
Class 1 3-42
Class 2 3-42
Class 3 3-42
General Thread Notes 3-43
Dimensioning a CounterBore Hole 3-44
Dimensioning a CounterSunk Hole 3-44
Chapter Summary 3-45
Questions/Exercises 3-46
Chapter 4 – Overview of SOLIDWORKS and the User Interface 4-1
Chapter Objective 4-3
What is SOLIDWORKS? 4-3
Basic concepts in SOLIDWORKS 4-3
Start a SOLIDWORKS Session 4-4
Tutorial: Start a SOLIDWORKS Session 4-4
Welcome dialog box 4-4
Home Tab 4-5
Recent Tab 4-5
Learn Tab 4-5
Alerts Tab 4-6
SOLIDWORKS User Interface (UI) and CommandManager
Menu Bar toolbar
4-7
4-7
Menu Bar menu (No model open) 4-8
Menu Bar menu (Model open) 4-8
Drop-down menu (Open part document) 4-8
Create a New Part Document 4-9
Novice Mode 4-10
Advanced Mode 4-10
Graphic Window (Default) 4-11Introduction Engineering Graphics with SOLIDWORKS® 2023
PAGE I – 10
View Default Sketch Planes 4-12
Open a Part 4-12
Part FeatureManager 4-13
FeatureManager Rollback Bar 4-13
Heads-up View toolbar 4-15
Dynamic Annotation Views 4-15
Zoom to Fit 4-15
Zoom to Area 4-15
Window-Select 4-15
Rotate 4-15
Front View 4-16
Right View 4-16
Top View 4-16
Trimetric view 4-16
SOLIDWORKS Help 4-16
SOLIDWORKS Tutorials 4-17
User Interface Tools 4-17
Right-click 4-18
Consolidated toolbar 4-18
System feedback icons 4-18
Confirmation Corner 4-19
Heads-up View toolbar 4-19
CommandManager (Default Part tab) 4-22
CommandManager (Default Drawing tab) 4-23
CommandManager (Default Assembly tab) 4-24
CommandManager (Float/Fit) 4-25
Collapse the CommandManager 4-25
FeatureManager Design Tree 4-26
FeatureManager design tree tab 4-26
PropertyManager tab 4-26
Configuration Manager tab 4-26
DimXpertManager tab 4-26
DisplayManager tab 4-26
CAM tab 4-26
Hide/Show tab 4-26
Sensors tool 4-26
Tags 4-27
Split 4-27
Fly-out FeatureManager 4-28
Task Pane 4-29
3DEXPERIENCE MARKETPLACE 4-29
SOLIDWORKS Resources 4-30
Design Library 4-30
File Explorer 4-31
View Palette 4-31
Appearances, Scenes and Decals 4-31
Custom Properties 4-32
Motion Study tab 4-32
3D Views tab 4-34
Dynamic Reference Visualization 4-34
Mouse Movements 4-35Engineering Graphics with SOLIDWORKS® 2023 Introduction
PAGE I – 11
Single-Click 4-35
Double-Click 4-35
Right-Click 4-35
Scroll Wheel 4-35
Summary 4-36
Chapter 5 – Introduction to SOLIDWORKS Part Modeling 5-1
Chapter Overview 5-3
File Management 5-4
Start a SOLIDWORKS Session and Open a New Part Document 5-5
Part Template 5-5
BATTERY Part 5-11
BATTERY Part-Extruded Boss/Base Feature 5-13
BATTERY Part-Fillet Feature Edge 5-17
BATTERY Part-Extruded Cut Feature 5-19
BATTERY Part-Second Fillet Feature 5-21
BATTERY Part Extruded-Boss/Base Feature 5-22
BATTERYPLATE Part 5-28
Save As, Delete, Edit Feature and Modify 5-29
BATTERYPLATE Part-Extruded Boss Feature 5-31
BATTERYPLATE Part-Fillet Features: Full Round and Multiple Radius Options 5-32
Multi-body Parts and Extruded Boss/Base Feature 5-35
Chapter Summary 5-36
Questions/Exercises 5-38
Chapter 6 – Revolved Boss/Base Features 6-1
Chapter Overview 6-3
LENS Part 6-4
LENS Part Revolved Boss/Base Feature 6-5
LENS Part-Shell Feature 6-8
LENS Part-Extruded Boss/Base Feature and Convert Entities Sketch tool 6-9
LENS Part-Hole Wizard Feature 6-10
LENS Part-Revolved Boss Thin Feature 6-12
LENS Part-Extruded Boss/Base Feature and Offset Entities 6-14
LENS Part-Extruded Boss Feature and Transparency 6-16
LENS Part-Transparent Optical Property 6-16
BULB Part 6-18
BULB Part-Revolved Base Feature 6-19
BULB Part-Revolved Boss Feature and Spline Sketch tool 6-21
BULB Part-Revolved Cut Thin Feature 6-23
BULB Part-Dome Feature 6-25
BULB Part-Circular Pattern Feature 6-26
BULB Part-Seed Cut Feature 6-26
BULB Part-Extruded Cut Feature 6-28
BULB Part-Circular Pattern Feature 6-29
Customizing Toolbars and Short Cut Keys 6-30
Chapter Summary 6-32
Questions/Exercises 6-33Introduction Engineering Graphics with SOLIDWORKS® 2023
PAGE I – 12
Chapter 7 – Swept, Lofted, Rib, Mirror and Additional Features 7-1
Chapter Overview 7-3
O-RING Part-Swept Base Feature 7-4
SWITCH Part-Lofted Base Feature 7-7
SWITCH Part-Dome Feature 7-12
Four Major Categories of Solid Features 7-14
LENSCAP Part 7-14
LENSCAP Part-Extruded Boss/Base, Extruded Cut and Shell Features 7-15
LENSCAP Part-Revolved Thin Cut Feature 7-18
LENSCAP Part-Thread, Swept Feature and Helix/Spiral Curve 7-19
HOUSING Part 7-25
HOUSING Part-Extruded Base Feature 7-27
HOUSING Part-Lofted Boss Feature 7-28
HOUSING Part-Second Extruded Boss/Base Feature 7-32
HOUSING Part-Shell Feature 7-33
HOUSING Part-Third Extruded Boss/Base Feature 7-34
HOUSING Part-Draft Feature 7-35
HOUSING Part-Threads and Swept Feature 7-37
HOUSING Part-Handle with Swept Feature 7-42
HOUSING Part-Extruded Cut Feature with Up To Surface Option 7-47
HOUSING Part-First Rib and Linear Pattern Feature 7-49
HOUSING Part-Second Rib Feature 7-52
HOUSING Part-Mirror Feature 7-55
Chapter Summary 7-58
Questions/Exercises 7-60
Chapter 8 – Assembly Modeling – Bottom up method 8-1
Chapter Overview 8-3
Assembly Modeling Overview 8-4
FLASHLIGHT Assembly 8-6
Assembly Techniques 8-7
Assembly Template 8-8
Assembly Templates-ASM-IN-ANSI 8-8
Assembly Templates-ASM-MM-ANSI 8-9
LENSANDBULB Sub-assembly 8-10
BATTERYANDPLATE Sub-assembly 8-14
CAPANDLENS Sub-assembly 8-16
FLASHLIGHT Assembly 8-20
FLASHLIGHT Assembly-Addressing Interference Issues 8-26
FLASHLIGHT Assembly-Exploded View 8-27
FLASHLIGHT Assembly-Export Files and eDrawings 8-30
Chapter Summary 8-33
Questions/Exercises 8-34
Chapter 9 – Fundamentals of Drawing 9-1
Chapter Overview 9-3
New Drawing and the Drawing Template 9-4
Title Block 9-7
Company Logo and Save Sheet Format 9-11
BATTERY Drawing 9-15
BATTERY Drawing – Insert a View 9-16Engineering Graphics with SOLIDWORKS® 2023 Introduction
PAGE I – 13
BATTERY Drawing – Detail View 9-19
BATTERY Drawing – View Display 9-20
BATTERY Drawing – Insert Model Items and Move Dimensions 9-21
BATTERY Drawing – Insert a Note 9-23
New Assembly Drawing and Exploded View 9-25
FLASHLIGHT Drawing – Bill of Materials and Balloons 9-27
Part Numbers 9-29
FLASHLIGHT Drawing – ConfigurationManager 9-30
FLASHLIGHT Drawing – Update the Bill of Materials 9-30
Design Tables and O-RING Design-Table Drawing 9-32
O-RING Drawing 9-34
O-RING Drawing – Design Table 9-35
Add a Center of Mass point 9-36
Chapter Summary 9-37
Questions/Exercises 9-38
Chapter 10 – Certified SOLIDWORKS Associate – Mechanical Design exam (CSWA) 10-1
Introduction 10-3
Part 1 of the Exam 10-5
Basic Part Creation and Modification, Intermediate Part Creation and Modification 10-5
Assembly Creation and Modification 10-7
Part 2 of the Exam 10-8
Introduction and Drafting Competencies 10-8
Advanced Part Creating and Modification 10-9
Assembly Creation and Modification 10-10
Intended Audience 10-11
During the Exam 10-12
Drafting Competencies 10-13
Example 1 10-13
Example 2 10-13
Example 3 10-14
Example 4 10-14
Example 5 10-14
Example 6 10-14
Basic Part Creation and Modification, Intermediate Part Creation and Modification 10-15
Example 1 10-16
Example 2 10-17
Example 3 10-18
Example 4 10-19
Example 5 10-20
Example 6 10-21
Example 6A 10-23
Example 6B 10-23
Advanced Part Creation and Modification 10-24
Example 1 10-24
Example 2 10-26
Example 3 10-27
Example 4 10-28
Example 5 10-29
Example 6 10-31
Example 6A 10-32Introduction Engineering Graphics with SOLIDWORKS® 2023
PAGE I – 14
Assembly Creation and Modification 10-33
Example 1 10-34
Chapter 11 – Additive Manufacturing – 3D printing fundamentals 11-1
Chapter Objective 11-3
Additive vs. Subtractive Manufacturing 11-4
3D Printer Technology 11-5
Stages of 3D Printing 11-5
Fused Filament Fabrication (FFF) 11-6
StereoLithography (SLA) 11-9
Selective Laser Sintering (SLS) 11-11
Select the Correct Filament Material for FFF 11-12
PLA (Polylactic Acid) 11-13
Flex/Soft PLA 11-13
PLA Storage 11-14
PLA Part Accuracy 11-14
ABS (Acrylonitrile-Butadiene-Styrene) 11-14
ABS Storage 11-15
ABS Part Accuracy 11-15
Nylon 11-16
Nylon 618 11-16
Nylon 645 11-16
Nylon Storage 11-17
Nylon Accuracy 11-17
PVA (Polyvinyl Alcohol) 11-17
STereoLithography (.stl) file 11-18 Save an STL (stl) file 11-18
Additive Manufacturing (amf) file 11-19 Save an Additive Manufacturing (amf) file 11-19
3D Manufacturing Format (.3mf) file 11-20 Save a 3D Manufacturing Format (.3mf) file 11-20
What is a Slicer? 11-21
How does a Slicer Work? 11-21
Slicer Parameters 11-21
Layer Height 11-21
Shell (Wall) Thickness 11-22
Infill Density/Overlap 11-22
Infill Patterns 11-22
Print Speed 11-23
Support Types 11-23
Touching Buildplate 11-23
Everywhere 11-24
Bed Platform Adhesion 11-24
Raft 11-24
Skirt 11-24
Brim 11-24
Part Orientation 11-25
Example 1 11-25
Example 2 11-26
Optimize Print Direction 11-26
Thin Region 11-26Engineering Graphics with SOLIDWORKS® 2023 Introduction
PAGE I – 15
Area of Overhang 11-26
Amount of needed Support 11-26
Remove Model from the Build Plate 11-28
Non-heated Build Plate 11-28
Heated Build Plate 11-28
Know the Printer’s Limitations 11-29
Tolerance for Interlocking Parts 11-29
General Printing Tips 11-29
Reduce Infill/Overlap 11-29
Control Build Area Temperature 11-30
Add Pads 11-31
Safe Zone Rule 11-31
First Layer Not Sticking 11-31
Level Build Platform 11-32
Minimize Internal Support 11-32
Design a Water Tight Mesh 11-32
Clearance 11-32
In General 11-33
Print Directly from SOLIDWORKS 11-34
Add-in 11-34
SOLIDWORKS Additive Manufacturing Certification (CSWA-AM) 11-35
Summary 11-36
Appendix
SOLIDWORKS Keyboard Shortcuts A-1
Modeling – Best Practices A-3
Helpful On-Line Information A-5
SOLIDWORKS Document Types A-6
Glossary G-1
Index I-1
INDEX
2 D Cartesian Coordinate System, 1-7
3 D Cartesian Coordinate System, 1-8
3 Point Arc Sketch tool, 6-6
3D Drawing View Command, 4-21
3D Model, 4-9, 11-4, 11-5, 11-19
3D Printing, 11-1
AA
bsolute Coordinates, 1-10
Abscissa, 1-7
Accelerator Keys, 4-28
Actual Size – General Tolerance
Nomenclature, 3-31
Add a Dimension, 5-23
Add Transparency, 6-16
Add-Ins, 4-22, 4-30
Additive Manufacturing, 11-1
Advanced Mode, 4-10
Aligned Dimension, 3-9, 5-24
Allowance – General Tolerance
Nomenclature, 3-31
Alphabet of Lines, 1-17
Break Lines, 1-20
Centerlines, 1-20
Cutting Plane Lines, 1-22
Dimension Lines, 1-18
Extension Lines, 1-18
Hidden Lines, 1-17
Leader Lines, 1-19
Phantom Lines, 1-21
Section Lines, 1-21
Visible Lines, 1-17
American National Standard and Unified
Screw Thread, 3-41
American National Standards Institute, 3-3
Angle of Rotation, 6-13
Angular Dimension, 3-9, 5-25
Angular Tolerance, 9-10
Animation, 4-32
Annotations Folder, 7-13
ANSI Drafting Standard, 3-3, 5-6
Appearance Callout tool, 6-17
Appearances, Scenes and Decals, 4-31
Apply Scene Command, 4-21
Arc – Geometric Entities, 1-16
Arc Dimension, 3-16
ASM-IN-ANSI, 8-8
ASM-MM-ISO, 8-9
Assembly Exploded View, 9-25
Assembly Modeling Overview, 8-4
Assembly Techniques, 8-7
Assembly Template, 8-8
Auxiliary View, 2-27
Axis of Revolution, 6-4, 6-8, 6-13
Axonometric Projection, 2-3
Dimetric, 2-3, 2-4
Isometric, 2-3, 2-4
Trimetric, 2-3, 2-5
BB
ack View, 1-33, 1-34
Balloons, 9-27
Base Sketch, 5-13
Basic Dimension – General Tolerance
Nomenclature – 3-30
Basic Mechanics of Drafting, 1-5
Basic Motion, 4-32
Basic Size – General Tolerance
Nomenclature, 3-31
BATTERY Drawing, 9-15
Insert a Note, 9-23
Insert Model Items Feature, 9-22
Multiple views, 9-15
View Display, 9-20
BATTERY Part, 5-11
Extruded Boss/Base Feature, 5-13
Extruded Cut Feature, 5-19
First Fillet Feature, 5-17
Second Extruded Boss Feature, 5-25
Second Fillet Feature, 5-21
BATTERYANDPLATE, 8-14
BATTERYPLATE Part, 5-28
Delete, 5-29
Edit Feature, 5-30
Extruded Boss/Base Feature, 5-31
Fillet Feature, 5-32
Modify, 5-29
Save As, 5-29
Bent Leader Lines, 1-19
Bilateral Tolerance, 3-29
Bill of Materials, 9-27
Boolean Operation, 2-29
Difference, 2-30
Intersection, 2-30
Union, 2-29, 2-30
Boss-Extrude PropertyManager, 5-15
Bottom View, 1-31
Break Lines, 1-20, 1-23, 1-24
Break or Broken View, 2-25
Broken out View, 2-24
BULB Part, 6-18
Circular Pattern Feature, 6-26, 6-29
Dome Feature, 6-25
Extruded Cut Feature, 6-28Index Engineering Graphics with SOLIDWORKS 2023
INDEX – 2
Revolved Base Feature, 6-19
Revolved Boss Feature, 6-21
Revolved Thin Cut Feature, 6-23
Seed Feature, 6-28
CC
APANDLENS Sub-assembly, 8-16
Cartesian Coordinates, 1-7
2 Dimensional, 1-7
3 Dimensional, 1-8
Absolute Coordinates, 1-10
Cylindrical / Spherical Coordinates, 1-11
Polar Coordinates, 1-11
Relative Coordinates, 1-10
Cartesian Plane, 1-7
Cbore Hole, 6-10
Center Rectangle Sketch tool, 5-14, 7-9
Centerline Sketch tool, 5-24, 6-6, 6-21
Centerlines – Alphabet of Lines, 1-20
Centerpoint Arc Sketch tool, 6-13
Chamfer Dimension, 3-10
Check Sketch tool, 6-7
Child, 2-23, 2-26
Circle – Geometric Entities, 1-15
Circle Sketch tool, 5-23, 7-5
Circular Pattern Feature, 6-26
Class 1 – Thread Class, 3-42
Class 2 – Thread Class, 3-42
Class 3 – Thread Class, 3-42
Clearance Fit, 3-32, 3-33
Close All Documents, 5-9
Coincident Geometric Relation, 6-10, 6-11,
6-23
Coincident Mate, 8-12, 8-14
CommandManager – Assembly, 4-24
Assembly tab, 4-24
Evaluate tab, 4-24
Layout tab, 4-24
Sketch tab, 4-24
SOLIDWORKS Add-In tab, 4-24
CommandManager – Dock, 4-25
CommandManager – Drawing, 4-23
Annotation tab, 4-23
Evaluate tab, 4-23
Sketch tab, 4-23
SOLIDWORKS Add-in tab, 4-23
View Layout tab, 4-23
CommandManager – Float, 4-25
CommandManager – Part, 4-22
DimXpert tab, 4-22
Evaluate tab, 4-22
Feature tab, 5-13
Sketch tab, 4-22
SOLIDWORKS Add-In tab, 4-24
Component, 8-4
Concentric Mate, 8-14
ConfigurationManager tab, 4-26
Confirmation Corner, 4-19
Consolidated toolbar, 4-18
Construction Dimensions, 3-4
Continuous Dimensions, 3-19
Control Points, 1-19
Convert Entities Sketch tool, 6-10, 6-17
Coordinate Axis, 1-9
Coordinate System – Left-hand, 1-8, 1-9
Coordinate System – Right-hand, 1-8, 1-9
Copy Sketch, 5-23
Copy tool, 5-23
Cosmetic Thread, 5-47, 5-48
Counterbore Hole, 3-44
Countersunk Hole, 3-44
Create a new part, 4-10, 5-14
Create an Assembly Template, 8-8
Crop View, 2-26
CSWA Certification, 10-1
CSWA Exam, 10-1
Content, 10-4
Intended Audience, 10-11
Introduction, 10-3
Advanced Part and Modification, 10-9
Assembly and Modification, 10-10
Basic Part and Modification, 10-15
Drafting Competencies, 10-8, 10-13
Intermediate Part/Modification, 10-15
Custom Properties, 5-5
Custom Scale Box, 9-19
Customize CommandManager, 4-23
Customize FeatureManager, 4-27
Customizing Short Cut Keys, 6-30
Customizing Toolbars, 6-30
Cutting Plane Lines, 1-22, 1-23
Cylindrical Dimension, 3-13
Cylindrical / Spherical Coordinates, 1-11
DD
efault Reference Planes, 4-11, 4-12
Front Plane, 4-12
Right Plane, 4-12
Top Plane, 4-12
Delete Feature, 5-29
Depth Dimension, 1-32
Design Intent, 2-33
Assembly, 2-35
Drawing, 2-35
Feature, 2-34
Part, 2-34
Sketch, 2-33
Design Library, 4-30
SolidWorks Content, 4-30
Toolbox, 4-30
Design Table, 9-32
Detail Drawing View, 9-19Engineering Graphics with SOLIDWORKS 2023 Index
INDEX – 3
Detail View tool, 9-19
Detail View, 2-23
Difference – Boolean Operation, 2-30
Dimension – Angular, 3-9, 3-10
Dimension – Arc, 3-16
Dimension – Chamfer, 3-10
Dimension – Cylindrical, 3-13
Dimension – Dual units, 3-6
Dimension – Fastener Hole, 3-13
Dimension – Linear, 3-8
Dimension – Local Tolerance, 3-28
Dimension – Tolerance, 3-26
Dimension – Radius, 3-11
Dimension – Simple Hole, 3-11
Dimension – Slot, 3-10
Dimension System – Metric, 3-5
Dimension System – U.S., 3-5
Dimetric Projection, 2-3, 2-4
DimXpertManager tab, 4-27
Display dimensions, 7-13
Display Style, 4-20
Hidden Lines Removed, 4-20
Hidden Lines Visible, 4-20
Shaded With Edges, 4-20
Shaded, 4-20
Wireframe, 4-20
DisplayManager tab, 4-26
Distance Mate, 8-18, 8-21
Dock CommandManager, 4-25
Document Properties, 5-5, 5-6
Dome Feature, 6-25
Dome PropertyManager, 6-25
Double Thread, 3-41
Draft Feature, 7-36
Draft option, 5-25
Draft PropertyManager, 7-36, 7-37
Drafting Tables, 1-5
Drafting Tools, 1-5, 1-6
Drafting Triangle, 1-6
DraftXpert PropertyManager, 7-36
Drawing – Tolerance, 3-27
Drawing Sheet icon, 9-18
Drawing Template, 9-4
Drawing View display, 9-20
Drawing View icon, 9-18
Drop-down menu, 4-8, 4-20, 4-28
Dual – Dimensioning System, 3-6
Dynamic Mirror Sketch tool, 6-27
EE
dit Command – Menu Bar Menu, 4-11
Edit Feature, 5-15, 6-29
Edit Sheet Format Mode, 9-3
Edit Sheet Mode, 9-4
eDrawings, 8-30
Ellipse – Major Axis, 2-7
Ellipse – Minor Axis, 2-7
Ellipse, 2-6, 2-7
End Chain, 6-6
Equal Geometric Relation, 6-7, 7-9
Equal Relation, 5-24
Exit Sketch, 5-15, 7-10
Exploded View, 8-27
Export Files, 8-30
Extension Lines, 1-18
Extension Lines/Lead Lines, 1-23
Extruded Cut Feature, 5-19, 5-20
FF
astener Hole Dimension, 3-13
Fasteners in General 3-34
Counterbore, 3-44
Countersunk, 3-44
Double Thread, 3-41
Female, 3-39
Fit, 3-32
Major Diameter, 3-38
Male, 3-37, 3-38
Pitch, 3-42, 3-43
Single Thread, 3-41
Thread Class, 3-42
Thread Notes, 3-37, 3-43
Triple Thread, 3-41
Features, 4-9, 5-11
Circular Pattern, 6-26
Cosmetic Thread, 5-47, 5-48
Dome, 6-25, 7-12
Draft, 7-35
Extruded Boss, 5-25, 5-32, 6-10
Extruded Boss/Base, 5-15, 5-32
Extruded Cut, 5-19
Fillet, 5-17, 5-32
Helix and Spiral, 7-19, 7-20, 7-39
Hole Wizard, 6-10
Linear Pattern, 7-50
Loft Base, 7-8, 7-13
Loft Boss, 7-26
Mirror, 7-56
Plane, 7-28, 7-52
Revolved Base, 6-5, 6-8, 6-19
Revolved Boss Thin Feature, 6-13
Revolved Boss, 6-21
Revolved Thin Cut, 6-23
Rib, 7-50, 7-55
Shell, 6-8, 7-15, 7-17, 7-33
Swept Base, 7-3, 7-4
Feature Statistics Dialog box, 7-13
FeatureManager Design Tree, 4-26
ConfigurationManager tab, 4-26
DimXpertManager tab, 4-26
DisplayManager tab, 4-26
FeatureManager tab, 4-26Index Engineering Graphics with SOLIDWORKS 2023
INDEX – 4
PropertyManager tab, 4-26
FeatureManager tab, 4-26
Female Thread – Fastener, 3-39
File Command – Menu Bar Menu, 4-8
File Explorer, 4-29, 4-31
File Location, 5-6
File Management, 5-4
File Properties Document Command, 5-6
Fillet Feature, 5-32
Full Round, 5-32
Multiple radius, 5-32
Fillet Folder, 5-35
Fillet PropertyManager, 5-33
First Angle Projection, 1-34, 9-5
Fit – General Tolerance, 3-26
Fit – Thread Class, 3-42
Fit the model, 5-21, 5-25, 5-30
Fits, 3-32, 3-33, 3-42
Clearance, 3-32, 3-33
Interference, 3-32, 3-33
Transition, 3-32, 3-33
FLASHLIGHT Assembly, 8-6, 8-20
FLASHLIGHT Drawing, 9-25
Balloons, 9-29
Bill of Materials, 9-28
ConfigurationManager, 9-30
Exploded view, 9-26
Part number, 9-29
Float CommandManager, 4-25
Fly-out FeatureManager, 4-28
Font Size, 9-9
Formatting Dialog box, 9-26
Formatting Inch Tolerances, 3-29
Freehand Sketching, 1-4, 1-12
Front View, 1-31
GG
aspard Monge’s, 1-33
General Sketching Techniques, 1-13
General Thread Notes, 3-37, 3-38, 3-39
General Tolerance – Title Block, 3-27
General Tolerance Nomenclature, 3-27
Actual Size, 3-31
Allowance, 3-31
Basic Dimension, 3-29
Basic Size, 3-31
Fit, 3-32
Least Material Condition, 3-31
Maximum Material Condition, 3-31
Nominal Size, 3-31
Tolerance, 3-31
Geometric Entities, 1-14
Arc, 1-16
Circle, 1-15
Line, 1-14
Plane, 1-15
Point, 1-14
Geometric Relation – Coincident, 6-11
Geometric Relation – Equal, 6-7, 7-9
Geometric Relation – Horizontal, 7-45
Geometric Relation – Intersection, 6-13
Geometric Relation – Perpendicular, 6-28
Geometric Relation – Pierce, 7-4, 7-23
Geometric Relation – Tangent, 7-10
Geometric Relation – Vertical, 6-13, 7-47
Geometry Pattern option, 7-51
Glass Box Method, 1-32
Global Coordinate System, 1-6
Graphics Window, 4-11
Heads-up View toolbar, 4-11
CommandManager, 4-11
FeatureManager, 4-11
Origin, 4-11
Tag, 4-11, 4-27
Task Pane, 4-11, 4-29
HH
eads-up View toolbar, 4-19
3D Drawing View, 4-21
Apply Scene, 4-21
Edit Appearance, 4-21
Hide/Show Items, 4-21
Previous View, 4-19
Rotate, 4-15, 4-21
Section View, 4-20
View Orientation, 4-20
View Setting, 4-21
Zoom to Area, 4-19
Zoom to Fit, 4-19
Height Dimension, 1-35
Helix and Spiral Feature, 7-39
Help Command – Menu bar menu, 4-8
Hidden Lines, 1-17, 1-23, 4-20
Hidden Lines Visible, 4-20, 7-17
Hide a Plane, 5-25
Hide Command, 5-25
Hide Components, 8-17
Hide FeatureManager Tree, 4-11
Hide Planes, 7-8, 7-11
History of CAD, 2-28
History of Engineering Graphics, 1-3
Hole Dimension location, 3-12, 3-15
Hole Wizard Feature, 5-50, 6-10
Horizontal Geometric relation, 7-44
HOUSING Part, 7-25
Draft Feature, 7-35
Extruded Base Feature, 7-27
First Extruded Boss Feature, 7-32
First Rib Feature, 7-49
First Swept Boss Feature, 7-37
First Swept Feature, 7-42
Helix and Spiral Feature, 7-39Engineering Graphics with SOLIDWORKS 2023 Index
INDEX – 5
Linear Pattern Feature, 7-49
Loft Boss Feature, 7-28, 7-31
Mirror Feature, 7-55
Second Extruded Boss Feature, 7-32
Second Extruded Cut Feature, 7-47
Second Rib Feature, 7-52
Second Swept Feature, 7-42
Shell Feature, 7-33
I & J & K
Inclined Plane, 1-42
Insert a Component, 8-11
Insert a Reference Plane, 7-8
Insert Command – Menu bar menu, 4-8
Insert Component tool, 8-11, 8-15, 8-17
Insert Model Items, 9-21
Interference Detection tool, 8-26
Interference Fit, 3-32, 3-33
International System – Dimensioning, 3-5
Intersection – Boolean Operation, 2-30
Intersection Geometric relation, 6-13
IPS (inch, pound, second), 3-6, 5-42
IPS Dimensioning System, 3-6
Isometric Projection, 2-3, 2-4
Isometric Sketching, 2-5
LL
eader Line, 1-19, 3-11
Least Material Condition – General
Tolerance Nomenclature, 3-31
Left-hand Coordinate System, 1-8, 1-9
Left-handed Thread, 3-41
LENS Part, 6-4
First Extruded Boss Feature, 6-9
Hole Wizard Feature, 6-10
Revolved Base Feature, 6-5, 6-8
Revolved Boss Thin Feature, 6-12
Second Extruded Boss Feature, 6-14
Shell Feature, 6-8
Transparent Optical Property, 6-16
LENSANDBULB Sub-assembly, 8-10
LENSCAP Part, 7-15
Extruded Base Feature, 7-16
Extruded Cut Feature, 7-17
Helix/Spiral Feature, 7-21
Revolved Thin Cut Feature, 7-18
Shell Feature, 7-17
Limit Tolerance, 3-28
Limits, 3-28, 3-31
Line – Geometric Entities, 1-14
Line Sketch tool, 6-6, 6-20, 6-23
Linear Dimension, 3-8
Linear Pattern Feature, 7-50
Linear Pattern PropertyManager, 7-51
Link to Property tool, 9-8
Local Coordinate System, 1-6
Local Tolerance – Dimension, 3-28
Location Dimension, 3-4
Loft Base Feature, 7-11
Loft Boss Feature, 7-28, 7-31
MM
ajor Diameter – Fastener, 3-38
Male Thread – Fastener, 3-37
Mate tool, 8-16, 8-18, 8-21, 8-23
Maximum Material Condition, 3-31
Measurement – units, 3-5
Dual, 3-6
English, 3-5
Metric, 3-5
Measure tool – Units/Precision, 5-26
Measure tool, 5-26
Mechanical Mates, 8-5
Menu Bar Menu, 4-8
Edit, 4-8
File, 4-8
Help, 4-8
Insert, 4-8
Pin, 4-8
View, 4-8
Window, 4-7
Menu Bar toolbar, 4-7
File Properties, 4-7
New, 4-7
Open, 4-7
Options, 4-8
Print, 4-7
Rebuild, 4-8
Save, 4-7
Select, 4-7
Undo, 4-7
Metric – Dimensioning System, 3-4
Metric ANSI – Dimensioning System, 3-4
Metric Dimension Specifications, 3-30
Mirror Entities Sketch tool, 7-30, 7-45
Mirror Feature, 7-56
MMGS, 3-5, 5-42
Model View tool, 9-16
Modify a Feature, 5-29
Modify drawing view scale, 9-26
Motion Study tab, 4-32
Animation, 4-32
Basic Motion, 4-32
MotionManager, 4-32
Animation, 4-32
Basic Motion, 4-32
Mouse Scroll Wheel, 4-35
Move drawing dimensions, 9-21
Multi-body Parts, 5-35
Multiple drawing views, 9-15
Multiple Radius Fillet feature, 5-32
MY-TEMPLATES Folder, 5-4Index Engineering Graphics with SOLIDWORKS 2023
INDEX – 6
NN
ew Document Command, 4-10
New Drawing, 9-5
New Motion Study tool, 4-33
New Part, 4-10, 6-5, 7-4
New View tool, 4-21
Nominal Size, 3-31
Normal Plane, 1-42
Novice Mode, 4-10
OO
blique Plane, 1-42
Oblique Projection, 2-9
Cabinet, 2-9
Cavalier, 2-9
Offset Entities Sketch tool, 5-19
Offset Plane, 7-20, 7-28
One View Drawing, 2-16
Open Document Command, 4-12
Optical Properties dialog box, 6-16
Options Command, 4-8, 5-6
Ordinate, 1-7
Order/Placement – Dimension lines, 3-17
Origin, 1-7, 4-11, 7-5, 7-35
O-RING Part, 7-4
Design Table, 9-32
Swept Base feature, 7-4
O-RING-DESIGN-TABLE Drawing, 9-35
Orthographic Projection, 1-31
Back / Rear View, 1-31
Bottom View, 1-31
Front View, 1-31
Left View, 1-31
Right View, 1-31
Top View, 1-31
Overall Drafting Standard, 5-6, 5-7
P & Q
Parallel Lines, 1-5
Parent, 2-23, 2-26
Part Template, 5-6
PART-IN-ANSI Template, 5-6, 5-7
PART-IN-ANSI, 5-6, 5-7
PART-MM-ISO Template, 5-7, 5-8
PART-MM-ISO, 5-7, 5-8
Paste a Sketch, 7-40
Perpendicular Geometric Relation, 6-28
Perspective Projection, 2-11
One point, 2-12
Three point, 2-13
Two point, 2-12
Phantom Lines, 1-22, 1-24
Pierce Geometric Relation, 7-4, 7-23, 7-40
Pitch – Fastener, 3-42
Plane – Geometric Entities, 1-14
Plane Feature, 7-28, 7-52
Plane PropertyManager, 7-8, 7-20, 7-38
Planes – Inclined, 1-42
Planes – Normal, 1-42
Planes – Oblique, 1-42
Plus-minus Tolerance, 3-29
Point – Geometric Entities, 1-14
Point of intersection, 1-7
Point Sketch tool, 7-11
Polar Coordinates, 1-11
Power Trim, 6-27
Precedence of Line Types, 1-23
Break Lines, 1-23
Centerlines, 1-23
Cutting Plane Lines, 1-23
Dimension Lines, 1-23
Extension Lines/Lead Lines, 1-23
Hidden Lines, 1-23
Section Lines/Crosshatch Lines, 1-22
Visible Lines, 1-22
Precision, 3-26
Primary Units, 3-6
Print Document Command, 4-7
Projection Lines – Transferring Dimensions,
1-35
PROJECTS Folder, 5-4
PropertyManager tab, 4-26
Quadrants, 1-8, 1-33
RR
adius Dimension, 3-11
Rebuild Document Command, 4-7, 5-29
Rebuild Sketch, 7-5
Reference Dimension, 3-8
Reference Planes, 4-11, 7-8
Front Plane, 4-11
Right Plane, 4-11
Top Plane, 4-11
Relative Coordinates, 1-10
Rename a Feature, 5-16
Revolved Base Feature, 6-5, 6-8, 6-19
Revolved Boss Feature, 6-21
Revolved Boss Thin Feature, 6-12, 6-13
Revolved Cut Feature, 6-23, 7-19
Revolved Thin Cut Feature, 6-23
Rib Feature, 7-49, 7-55
Rib PropertyManager, 7-50
Right View, 1-31
Right-click Select tool, 4-35, 6-7
Right-click, 4-18
Right-hand Coordinate System, 1-8, 1-9
Right-hand Thread, 3-41
Rotate Part, 4-15
Rotate Component tool, 8-23
SS
.I Dimensioning System, 3-4Engineering Graphics with SOLIDWORKS 2023 Index
INDEX – 7
Save As Command, 5-29
Save Document Command, 4-7
Save Sheet Format, 9-11
Scales, 3-7
Architect’s Scale, 3-7
Engineer’s Scale, 3-7
Linear encoder, 3-7
Linear Scale, 3-7
Vernier Scale, 3-7
Screw Thread, 3-37
Secondary Units, 3-6
Section Lines, 1-21, 1-23
Section View, 2-21, 5-12
Seed Feature, 6-28
Selection Filter tool, 4-27
Sensors tool, 4-26
Shaded With Edges, 4-20
Shaded, 4-20
Sheet Properties, 9-6
Shell Feature, 6-8, 7-17, 7-33
Shell PropertyManager, 7-17
Show Components, 8-19
Show Feature Dimensions, 7-13
Show Plane, 6-6, 7-28
Show Temporary Axes, 6-22
Show tool, 6-6
Silhouette Edge, 6-13, 7-18, 7-54
Simple Hole – Dimension, 3-11, 3-12
Single Thread, 3-41
Six Principal Orthographic Views, 1-32
Size Dimension, 3-4
Sketch Fillet Sketch tool, 7-29, 7-42
Sketch Plane, 5-13, 5-14
Sketch Relations, 5-14
Sketch Status, 5-16
Currently selected, 5-16
Fully defined, 5-16
Over defined, 5-16
Under defined, 5-16
Sketch tool – 3 Point Arc, 6-6
Sketch tool – Center Rectangle, 7-9
Sketch tool – Centerline, 6-6, 6-20
Sketch tool – Centerpoint Arc, 6-13
Sketch tool – Circle, 7-5
Sketch tool – Convert Entities, 6-10, 6-17
Sketch tool – Dynamic Mirror, 6-27
Sketch tool – Line, 6-6, 6-20
Sketch tool – Mirror Entities, 7-30, 7-45
Sketch tool – Offset Entities, 5-19, 6-15
Sketch tool – Point, 7-11
Sketch tool – Sketch Fillet, 7-29, 7-42
Sketch tool – Smart Dimension, 5-15, 6-7
Sketch tool – Spline, 6-21
Sketch tool – Tangent Arc, 7-44, 7-54
Sketch tool – Trim Entities, 6-27, 7-30
Slot Dimension, 3-10
Smart Dimension Sketch tool, 5-15, 6-7
Solid Primitives, 1-16
Box, 1-16
Cone, 1-16
Cylinder, 1-16
Pyramid, 1-16
Sphere, 1-16
Torus, 1-16
Wedge, 1-16
SOLIDWORKS Help, 4-16, 4-17
SOLIDWORKS Resources, 4-29
SOLIDWORKS Tutorials, 4-17
SOLIDWORKS User Interface, 4-11
Confirmation Corner, 4-19
Consolidated drop-down menu, 4-18
Drop-down menu, 4-8
FeatureManager Design Tree, 4-13, 4-26
Fly-out FeatureManager, 4-28
Graphics window, 4-11
Heads-up View toolbar, 4-11, 4-15
Menu Bar Menu, 4-8
Menu Bar toolbar, 4-7
Motion Study tab, 4-33
New, 4-7
Open, 4-7
Options, 4-8
Print, 4-7
Rebuild, 4-8
Reference triad, 4-11
Right-click Pop-up menu, 4-14, 4-18
Save, 4-7
Tags, 4-11
Task Pane, 4-11, 4-29
Undo, 4-7
Spline Sketch tool, 6-21
Split FeatureManager, 4-27
Stagger dimension, 3-8
Standard Mates, 8-5
Standards for Dimensioning, 3-8
Aligned Dimension, 3-9
Angular Dimension, 3-9
Chamfer Dimension, 3-10
Cylindrical Dimension, 3-13
Linear Dimension, 3-8
Simple Hole Dimension, 3-11
Slot Dimension, 3-10
Stagger Dimension, 3-8
Start a SOLIDWORKS Session, 4-4
Statistics tool, 7-14
Sub-assembly, 8-4
Suppress, 8-10
Swept Base Feature, 7-4, 7-5
Swept Path, 7-5
Swept Profile, 7-4
SWITCH Part, 7-8
SWITCH Part – Loft Base Feature, 7-11Index Engineering Graphics with SOLIDWORKS 2023
INDEX – 8
SWITCH Part – Shape Feature, 7-12
System Feedback icon, 4-18
Dimension, 4-18
Edge, 4-18
Face, 4-18
Vertex, 4-18
System Options, 5-5
Document Templates, 5-5
TT
angent Arc Sketch tool, 7-44, 7-54
Tangent Edge Visible, 9-20
Tangent Geometric Relation, 7-10
Task Pane, 4-29
3DEXPERIENCE MARKETPLACE, 4-29
Appearances, Scenes and Decals, 4-31
Custom Properties, 4-32
Design Library, 4-30
File Explorer, 4-31
SolidWorks Resources, 4-30
View Palette, 4-31
Templates tab, 4-10
Temporary Axes, 6-22, 6-29
Third Angle Projection, 1-31, 1-33, 9-40
Thread – Major Diameter, 3-38
Thread Class of Fit, 3-42
Class 1, 3-42
Class 2, 3-42
Class 3, 3-42
Title Block – General Tolerance, 3-27
Title Block, 9-7
Tolerance, 3-26
Bilateral, 3-29
Dimension, 3-27
Drawing, 3-27
Limits, 3-28
Title Block, 3-27
Unilateral, 3-29
Note, 9-9
Tolerance Types, 3-28
Bilateral, 3-29
Limit, 3-28
Unilateral, 3-29
Top View, 1-31
Transferring Dimensions – Projection Lines,
1-35
Transition Fit, 3-32, 3-33
Transparency, 6-17
Trim Entities Sketch tool, 6-27, 7-30
Trimetric Projection, 2-3, 2-5
Triple Thread, 3-41
T-square, 1-5
Tutorial tab, 4-10
Two View Drawing, 2-14
UU
.S. ANSI – Dimensioning System, 3-4
Unified National Screw Thread Series, – UN

• 3-41
  Unified National Screw Thread Series, –
  UNC – 3-41
  Unified National Screw Thread Series, –
  UNRC – 3-41
  Unified National Screw Thread Series, –
  UNRF – 3-41
  Unilateral Tolerance, 3-29
  Union – Boolean Operation, 2-29
  Units – IPS, 5-6
  Units – MMGS, 5-7
  Units, 5-6, 5-7
  Up To Surface End Condition, 7-48
  VV
  anishing Point, 2-11
  Vertex point, 7-52
  Vertical Geometric relation, 6-20, 7-47
  View Layout tab, 9-16
  View Orientation, 4-20
  Back, 4-20
  Bottom, 4-20
  Dimetric, 4-20
  Four view, 4-20
  Front, 4-20
  Isometric, 4-20
  Left, 4-20
  Right, 4-20
  Single view, 4-20
  Top, 4-20
  Trimetric, 4-20
  Two view, 4-20
  View Palette, 4-31, 9-15, 9-16, 9-34
  View Sketch Relations, 6-20
  Visible Lines, 1-17, 1-23
  WW
  idth Dimension, 1-35
  Wireframe, 4-20
  X & Y & Z
  X,-Y Plane, 1-7
  X,-Y,-Z Plane, 1-8
  Zoom to Area, 4-19
  Zoom to Fit, 4-15

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net