Emerging Technologies in Non-Destructive Testing VI

Emerging Technologies in Non-Destructive Testing VI
اسم المؤلف
D.G. Aggelis & D. Van Hemelrijck
13 يونيو 2020
(لا توجد تقييمات)

Emerging Technologies in Non-Destructive Testing VI
D.G. Aggelis & D. Van Hemelrijck
Department of Mechanics of Materials and Constructions (MeMC),
Faculty of Engineering, Vrije Universiteit Brussel, Elsene, Belgium
S. Vanlanduit
Department of Mechanical Engineering (MECH), Faculty of Engineering,
Vrije Universiteit Brussel, Brussels, Belgium
A. Anastasopoulos
Mistras Group Hellas, Athens, Greece
T.P. Philippidis
Department of Mechanical Engineering and Aeronautics,
University of Patras, Patras, Greece
Table of contents
Preface xi
Organization xiii
Plenary papers
Basics and applications of NDE based on elastodynamics toward infra-dock for concrete structures 3
M. Ohtsu
Resonant defects: A new approach to highly-sensitive defect-selective ultrasonic imaging 13
I. Solodov
Infra-asset assessment with innovative NDT
Experimental verification of a Rayleigh-wave based technique for detecting the depth
of deteriorated concrete 25
K.C. Chang, T. Shiotani & S.B. Tamrakar
Evaluation of grouting conditions for PC structures with wide-band ultrasounds 33
M. Hashinoki, M. Hara, T. Kinoshita & K.C. Chang
Two-dimensional AE-Tomography based on ray-trace technique for anisotropic materials 41
Y. Kobayashi & T. Shiotani
Characterization of inclined surface crack in steel reinforced-concrete
by multichannel R-wave measurements 49
F.W. Lee, H.K. Chai & K.S. Lim
Elastic wave tomography with arbitrary locations of impact 55
K. Matsumoto, S. Momoki, T. Shiotani & Y. Kobayashi
An ultrasonic method utilizing anchors to inspect steel-plate bonded RC decks 61
N. Ogura, H. Yatsumoto, K.C. Chang & T. Shiotani
Strategic maintenance philosophy for infra-asset with innovative NDT 69
T. Shiotani
Use of X-ray CT and AE for detection of cracked concrete properties 79
T. Suzuki, T. Morii & T. Shiotani
Ultrasonic method for predicting residual tension of ground anchors 85
S.B. Tamrakar, T. Shiotani, K.C. Chang & Y. Fujiwara
Use of Digital Image Correlation (DIC) and Acoustic Emission (AE) to characterise
the structural behaviour of hybrid composite-concrete beams 93
S. Verbruggen, S. De Sutter, S.N. Iliopoulos, D.G. Aggelis & T. Tysmans
Elastic waves
An ACA/BEM for solving wave propagation problems in non-homogeneous materials 103
T. Gortsas, I. Diakides, D. Polyzos & S.T. Tsinopoulos
Acousto-ultrasonic Structural Health Monitoring of aerospace composite materials 109
M. Gresil, A. Muller & C. Soutisvi
Guided wave tomography based inspection of CFRP plates using a probabilistic
reconstruction algorithm 117
J. Hettler, M. Tabatabaeipour, S. Delrue & K. Van Den Abeele
Modelling the dispersive behavior of fresh and hardened concrete specimens through
non-local lattice models 125
S.N. Iliopoulos, D.G. Aggelis & D. Polyzos
The Ultrasonic Polar Scan: Past, present and future 133
M. Kersemans, A. Martens, S. Delrue, K. Van Den Abeele, L. Pyl, F. Zastavnik,
H. Sol, J. Degrieck & W. Van Paepegem
Time-Of-Flight recorded Pulsed Ultrasonic Polar Scan for elasticity characterization
of composites 141
A. Martens, M. Kersemans, J. Degrieck, W. Van Paepegem, S. Delrue & K. Van Den Abeele
Ultrasonic testing of adhesively bonded joints in glass panels 147
B. Moj?kerc, T. Kek & J. Grum
Guided ultrasonic waves for the NDT of immersed plates 153
P. Rizzo, E. Pistone & A. Bagheri
Nonlinear elastic waves
Nonlinear acoustics and acoustic emission methods to monitor damage
in mesoscopic elastic materials 161
M. Bentahar, R. El Guerjouma, C. Mechri, Y. Baccouche, S. Idjimarene, A. Novak,
S. Toumi, V. Tournat, J.-H. Thomas & M. Scalerandi
A simulation study of Local Defect Resonances (LDR) 167
S. Delrue & K. Van Den Abeele
Highly Nonlinear Solitary Waves for the NDT of slender beams 173
P. Rizzo, A. Bagheri & E. La Malfa Ribolla
Nonlinear ultrasonic inspection of friction stir welds 179
M. Tabatabaeipour, J. Hettler, S. Delrue & K. Van Den Abeele
Acoustic emission, damage and lifetime prediction of composites
Fracture mechanism of CFRP-strengthened RC beam identified by AE-SiGMA 185
N. Alver, H.M. Tanarslan, ?.Y. Sülün & E. Ercan
Acoustic emission of fiber reinforced concrete under double-punching indirect tensile loading 191
D. Choumanidis, P. Nomikos, A. Sofianos, E. Komninou, P. Oikonomou & E. Badogiannis
Acoustic emission monitoring of high temperature process vessels & reactors during cool down 197
D. Papasalouros, K. Bollas, D. Kourousis & A. Anastasopoulos
NDT in aerospace
Thermal strains in heated Fiber Metal Laminates 205
B. Müller, J. Sinke, A.G. Anisimov & R.M. Groves
Lamb wave dispersion time-domain study using a combined signal processing approach 213
P. Ochôa, R.M. Groves & R. Benedictus
Fuse-like devices replacing linear sensors—working examples of percolation sensors
in operational airliners and chemical installations 219
H. Pfeiffer, I. Pitropakis, M. Wevers, H. Sekler & M. Schoonacker
Non-Destructive Testing techniques to evaluate the healing efficiency of self-healing
concrete at lab-scale 227
E. Gruyaert, J. Feiteira, N. De Belie, F. Malm, M. Nahm, C.U. Grosse, E. Tziviloglou,
E. Schlangen & E. Tsangourivii
Assessment of grouted connection in monopile wind turbine foundations
using combined non-destructive techniques 235
A.N. Iliopoulos, D. Van Hemelrijck, D.G. Aggelis & C. Devriendt
Detection of damaged tool in injection molding process with acoustic emission 241
T. Kek, D. Kusi? & J. Grum
An experimental investigation of Electromagnetic Acoustic Transducers applied
to high temperature plates for potential use in solar thermal industry 247
M. Kogia, L. Cheng, A. Mohimi, V. Kappatos, T.-H. Gan, W. Balachandran & C. Selcuk
Monitoring of self-healing activation by means of Acoustic Emission and Digital
Image Correlation 255
P. Minnebo, D.G. Aggelis & D. Van Hemelrijck
Finite element model updating using thermographic measurements: Comparison between
materials with high and low thermal conductivity 261
J. Peeters, B. Ribbens, J.J.J. Dirckx & G. Steenackers
Portable automated Radio-Frequency scanner for Non-Destructive Testing
of Carbon-Fibre-Reinforced Polymer composites 267
B. Salski, W. Gwarek, P. Kopyt, P. Theodorakeas, I. Hatziioannidis, M. Koui,
A.Y.B. Chong, S.M. Tan, V. Kappatos, C. Selcuk & T.-H. Gan
Detection of the interface between two metals by DC current
stimulated thermography 275
N.J. Siakavellas & J. Sarris
Water-Absorption-Measurement instrument for masonry façades 281
M. Stelzmann, U. M?ller & R. Plagge
Assessment of eSHM system combining different NDT methods 287
M. Strantza, D.G. Aggelis, D. De Baere, P. Guillaume &
D. Van Hemelrijck
Non-destructive evaluation of an infusion process using capacitive
sensing technique 293
Y. Yang, T. Vervust, F. Bossuyt, J. Vanfleteren, G. Chiesura, G. Luyckx,
J. Degrieck & M. Kaufmann
In-situ testing using combined NDT methods for the technical evaluation
of existing bridge 299
N.V. Zoidis, E.N. Tatsis, E.D. Manikas & T.E. Matikas
Biological applications
Kinect sensor for 3D modelling of logs in small sawmills 309
J. Antikainen & D. Xiaolei
A noninvasive approach for the assessment of dental implants stability 315
P. Rizzo, E. La Malfa Ribolla & A. Di Cara
Monitoring techniques for nanocrystalline stabilized zirconia from some
medical prosthesis 319
A. Savin, M.L. Craus, V. Turchenko, A. Bruma, S. Malo & T.E. Konstantinova
Raman spectroscopy: An emerging technique for minimally-invasive clinical testing 327
M.Z. Vardaki, P.S. Papaspyridakou, G.L. Givalos, C.G. Kontoyannis & M.G. Orkoula
Combination of NDT techniques
Concrete compressive strength estimation by means of combined NDT 335
G. Concu, B. De Nicolo, N. Trulli & M. Valdés
Development of a Condition Monitoring system for tidal stream generators rotating
components combining Acoustic Emission and vibration analysis 341
J.L.F. Chacon, V. Kappatos, C. Selcuk, A. Romero, J. Jimenez, S. Soua & T.-H. Ganviii
Detection of incipient SCC damage in primary loop piping using various novel
NDE technologies 347
B.K. Jackson, J.L.W. Warwick, W. Li & J.J. Wall
Comparative study of NDT inspection methods in carbon fiber composite laminates 353
G. Steenackers, J. Peeters, G. Arroud & S. Wille
Embedded sensors
Investigations on the structural integrity and functional capability of embedded
piezoelectric modules 361
S. Geller, A. Winkler & M. Gude
Healing performance monitoring using embedded piezoelectric transducers in concrete
structures 367
G. Karaiskos, E. Tsangouri, D.G. Aggelis, D. Van Hemelrijck & A. Deraemaeker
Fibre-reinforced composites with embedded piezoelectric sensor-actuator-arrays 375
A. Winkler, M. Dannemann, E. Starke, K. Holeczek & N. Modler
Application of NDT/SHM techniques to cultural heritage
Comparative surface damage determination at a Jewish grave, found in front
of the central building of Aristotle University of Thessaloniki, using two different
mobile ultrasonic velocity equipments 383
B. Christaras, A. Moropoulou, M. Chatziangelou, L. Dimitraki & K. Devlioti
A new visual-based diagnostic protocol for cultural heritage exploiting
the MPEG-7 standard 389
A. Doulamis, A. Kioussi & A. Moropoulou
Comprehensive energy diagnosis methodology integrating non destructive testing 397
M.A. Garc?a-Fuentes, J.L. Hern?ndez, A. Meiss & C. Colla
Non-contact contemporary techniques for the geometric recording of Cultural Heritage 405
A. Georgopoulos
Numerical methods for the interpretation and exploitation of AE monitoring results 413
S. Invernizzi, G. Lacidogna & A. Carpinteri
Digital cultural heritage—A challenge for the chemical engineering: Contextualizing
materials in a holistic framework 421
M. Ioannides, E. Alexakis, C.M. Coughenour, M.L. Vincent, M.F. Gutierrez,
V.M. Lopez-Menchero Bendicho, D. Fritsch, A. Moropoulou, V. Rajcic & R. Zarnic
Raman spectroscopy. A non-destructive tool for on-site chemical analysis
of artifacts and monuments 427
E.Th. Kamilari, S.N. Kouvaritaki, M.G. Orkoula & C.G. Kontoyannis
Evaluation of seismic risk in regional areas by AE monitoring of historical buildings 433
G. Lacidogna, P. Cutugno, F. Accornero, S. Invernizzi & A. Carpinteri
Non-destructive evaluation of historic natural stone masonry with GPR 441
F. Lehmann & M. Krüger
Application of the mortar static penetration test to historical buildings 449
D. Liberatore, L. Sorrentino, L. Frezza, N. Masini, M. Sileo & V. Racina
Non destructive testing to perform service of the evaluation of conservation works 457
R. Manganelli Del Fà, C. Riminesi, S. Rescic, P. Tiano & A. Sansonetti
Tube-jack and sonic testing for the evaluation of the state of stress in historical masonry 465
E.C. Manning, L.F. Ramos, P.B. Lourenço & F.M. Fernandesix
Integration of EFD, MRM and IRT for moisture mapping on historic masonry:
Study cases in northern Italy 471
R. Olmi, C. Riminesi & E. Rosina
Pre-diagnostic prompt investigation of a historic Bell Tower by visual inspection
and microwave remote sensing 477
A. Saisi, C. Gentile & L. Valsasnini
On site investigation and continuous dynamic monitoring of a historic tower in Mantua, Italy 485
A. Saisi, M. Guidobaldi & C. Gentile
Focus on soluble salts transport phenomena: The study cases of Leonardo monochrome
at Sala delle Asse (Milan) 493
A. Sansonetti, M. Realini, S. Erba & E. Rosina
Novel applications of micro-destructive cutting techniques in cultural heritage 499
M. Theodoridou & I. Ioannou
Integrated ND methodologies for the evaluation of the adhesion of frescoes
on stone masonry walls 505
M.R. Valluzzi, G. Salemi, R. Deiana, E. Faresin, G. Giacomello, M. Giaretton,
M. Panizza, M. Pasetto, S. Cal?, M. Battistella & A. Frestazzi
Detection and localization of debonding damage in composite-masonry strengthening
systems with the Acoustic Emission technique 511
E. Verstrynge, K. Van Balen, M. Wevers, B. Ghiassi & D.V. Oliveira
NDTs in the monitoring and preservation of historical architectural surfaces 519
L. Falchi, E. Zendri & G. Driussi
Optical sensors for structural health monitoring
The novel potential for embedded strain measurements offered by micro-structured
optical fiber Bragg gratings 529
T. Geernaert, S. Sulejmani, C. Sonnenfeld, H. Thienpont, F. Berghmans, G. Luyckx,
J. Degrieck & D. Van Hemelrijck
Combining embedded Fibre Bragg Grating sensors and modal analysis techniques
to monitor fatigue induced propagating delaminations in composite laminates 537
A. Lamberti, G. Chiesura, B. De Pauw & S. Vanlanduit
SMARTFIBER: Miniaturized optical-fiber sensor based health monitoring system 543
N. Lammens, G. Luyckx, E. Voet, W. Van Paepegem & J. Degrieck
Electromagnetics and X-rays
Micro-CT as a well-established technique to investigate the internal damage state
of a composite laminate subjected to fatigue 551
G. Chiesura, G. Luyckx, E. Voet, W. Van Paepegem, J. Degrieck, M.N. Boone,
J. Dhaene & L. Van Hoorebeke
Damage detection and classification in composite structure after water-jet cutting
using computed tomography and wavelet analysis 557
A. Katunin
Post Weld Heat Treatment surface residual stress measurements using X-ray diffraction 563
S. Kumar, M.J. Tan, B.S. Wong & N. Weeks
Enhancement of spatial resolution using metamaterial sensor in NonDestructive Evaluation 569
A. Savin, N. Iftimie, R. Steigmann & A. Bruma
Author index
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net


يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول


اترك تعليقاً