Operation and Maintenance Manual – Bench Lathe

Operation and Maintenance Manual – Bench Lathe
Art. T999/230V – T999/230V3A
Art. T999/400V – T999/400V3A
INDEX
1 GENERAL INFORMATION .5
2 GENERAL SAFETY WARNINGS .7
2.1 General safety rules for machine equipment .7
2.2 Safety rules for electrical machine equipment 9
2.3 Technical Assistance .9
2.4 Other provisions .9
3 TECHNICAL SPECIFICATIONS .10
4 DESCRIPTION OF THE MACHINE .11
4.1 Intended use and field of application 11
4.2 Description of the main parts 13
4.2.1 Supporting table 14
4.2.2 Head and spindle . 14
4.2.3 Spindle speed adjustment levers 14
4.2.4 Feed speed adjustment panel 15
4.2.5 Tool holder carriage . 15
4.2.6 Tailstock . 15
4.2.7 Steady rest . 16
4.2.8 Electric control panel 16
4.2.9 Pedal brake . 16
4.2.10 Rotation reverse lever 17
4.3 Identification plate .17
4.4 Pictograms and plates .18
5 MACHINE SAFETY DEVICES .19
5.1 Electrical safety devices 19
5.2 Mechanical Safety Devices 20
5.3 Personal Protective Equipment (PPE) .21
6 FORBIDDEN USES AND HAZARDS .22
7 LIFTING, TRANSPORTATION AND STORAGE IN WAREHOUSE .24
7.1 Lifting .24
7.2 Transportation 24
7.3 Warehouse storage .24
8 ASSEMBLY AND COMMISSIONING 25
8.1 Identification of the installation site .25
8.2 Support base .25
8.3 Levelling the machine .26
8.3.1 Preliminary phase 26
8.3.2 Transverse levelling of the table 26
fervi.comMACHINES AND
ACCESSORIES
Page 4 of 84
8.3.3 Levelling the lathe rails . 26
8.4 Operations before starting the machine 26
8.4.1 Lubrication and greasing . 26
8.4.2 Connection to the power supply network . 26
8.4.3 Open circuit test 27
9 DESCRIPTION OF CONTROLS 28
9.1 Control buttons .28
9.1.1 Main switch . 28
9.1.2 Electric and control panel buttons and lights 28
9.1.3 Emergency button 29
9.2 Levers and control wheels 29
9.2.1 Spindle speed adjustment knobs 29
9.2.2 Automatic feed speed adjustment knobs . 30
9.2.3 Adjustment knob / lever of the split casing 31
9.2.4 Levers and handwheels of the carriage and tool holder slides 32
9.2.5 Lever and handwheel of the tailstock 33
9.3 Mechanical brake pedal of the spindle 34
9.4 Digital display .34
9.4.1 Using the display . 35
10 OPERATION 46
10.1 Automatic Feed Tool Carriage 49
11 MAINTENANCE .51
11.1 Lubrication .52
11.2 Periodic checks 54
11.3 Adjusting the Machine .54
11.3.1 Adjusting the tension of the motor belts . 54
11.3.2 Tailstock alignment 55
11.3.3 Spindle alignment 55
11.3.4 Adjusting the slack of the gears . 56
12 REPLACEMENT PARTS .57
12.1 ACCESSORIES SUPPLIED 80
13 DISPOSAL OF PARTS AND MATERIALS .81
14 TROUBLESHOOTING .82
15 ELECTRIC CIRCUIT .83
15.1 Art. T999/400V 83
15.2 Art. T999/230V 84
fervi.comMACHINES AND
ACCESSORIES

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net