Official Certified SolidWorks Professional (CSWP) Certification

Official Certified SolidWorks Professional (CSWP) Certification
كتاب التدريب على امتحان المحترف في السوليدوركس
David C. Planchard
CSWP & SolidWorks Accredited Educator
TABLE OF CONTENTS
Introduction
Goals
CSWP Audience
About the Author
Acknowledgements
Contact the Author
References
Table of Contents
About the Book
Testing Tips
Appendix
Chapter 1 – Segment 1 of the CSWP CORE Exam
Introduction
Read and Understand an Engineering document
Engineering Documentation Practices
Build a Part from a detailed illustration
Segment 1
Question 1 – Create a part
Question 2 – Modify the part – Global Variables
Question 3 – Modify the part – Global Variables / recover from errors
Question 4 – Modify the part – Global Variables and equations
Question 5 – Modify the part – Global Variables and equations
Practice Problems
Practice Problem 1 – Create a part
Practice Problem 2 – Modify the part – Global Variables and equations
Practice Problem 3 – Modify the part – Global Variables / recover from errors
Chapter 2 – Segment 2 of the CSWP CORE Exam
Introduction
Segment2
First Category
Creating Configuration
Question 1 – Number of configurations
Question 2 – Create a new configuration
Modifying Configurations
Question 3 – Suppress features in a configuration
Question 4 – New configuration
Question 5 – Design table
Second Category
Modifying features
Question 6 – Determine the mass
Question 7 – Modify a feature
Question 8 – Modify a feature
Question 9 – Modify a reference feature
Question 10 – Modify a reference feature
Question 11 – Modify a sketch and reference feature
Practice Problems
Creating Configuration
Question 1 – Number of configurations
Question 2 – Calculate the mass
Question 3 – Create a new configuration
Modifying features
Question 4 – Modify features and recover from errors
Chapter 3- Segment 3 of the CSWP CORE Exam
Introduction
Segment 3
Question 1 – Create the Basel component
Question 2 – Create the Welding Arm assembly document
Question 3 – Insert the Arm and Top-Fixture-A assembly
Question 4 – Insert the Holder-Thongs-A assembly
Question 5 – Apply Collision Detection
Question 6 – Apply Interference Detection
Question 7 – Create the Hydraulic and Brace assembly
Question 8 – Insert the Hydraulic & Brace assembly (flexible)
Question 9 – Apply the Measure tool (Angle)
Question 10 – Calculate the center of gravity relative to Coordinate System1
Question 11 – Replace component in the assembly (recover from mate errors
Practice Problems
Question 1 – Create the Bench Vice assembly document
Question 2 – Insert the Bench Vise-Base (re-orientate)
Question 3 – Insert the Bench Vise-Main Body assembly
Question 4 – Insert the Bench Vise-Threaded Rod and Sliding Jaw
Question 5 – Apply the Measure tool (Angle)
Question 6 – Insert the Bench Vise Handle
Question 7 – Apply the Collision Detection tool
Question 8 – Replace component in the assembly (recover from mate errors)
Appendix
Keyboard Shortcuts
SolidWorks Document Types
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net