بحث بعنوان Flywheel Power Generation and Multiplication

بحث بعنوان Flywheel Power Generation and Multiplication
اسم المؤلف
Chaganti Srinivas Bhaskar, Chaganti Bala
التاريخ
17 سبتمبر 2021
المشاهدات
التقييم
(لا توجد تقييمات)
Loading...

بحث بعنوان
Flywheel Power Generation and Multiplication
Chaganti Srinivas Bhaskar, Chaganti Bala
Abstract:- This Case study of multi-hour electrical generation using the continuously available rotating force from a specific
weight, diameter, and rpm is considered in flywheel power generation technology because the wheel is continuous in motion. we
are designing energy generation and storage projects for generating clean electricity using Gear-flywheel and Pinion gear. Pinion
gear harboring the generator is the innovation.
This technology major advantage is the design, where distribution of mass in a given area of the flywheel is the key to success.
Flywheels with Different geometrical figures are used for multidimensional requirements. For 1 Kw power generation at least 150
Kg weight is required.
Key Words: Gear Flywheel, Flywheel, Power Multiplication, Generator, Motor, Storage
CONCLUSIONS
This technology mainly rotates in and around weight and space management, there by using a specified weight i.e.
For example
In the present market design, 67 Ton weight is designed as a cylinder by using carbon fiber-reinforced plastic flywheels fixed in
a vacuum chamber and rotated in between 6000 to 16000 Rpm using magnetic bearings and after reaching the peak Rpm then
deceleration of the flywheel starts.
Here the pulse of the flywheel recorded is maximum in between 1 to 5 min. Then again the process of acceleration and
deceleration has to be repeated. There is no continuous mode.
In our technology 67 Ton weight is distributed on a large surface area there by bigger surface area is available and will generate
more surface velocity there by more energy is stored in the rotating flywheel mass.
In our design we make from 67 Ton a 12 meter diameter flat and round circle flywheel and rotate below 2000 Rpm using
normal SKF bearings there by please compare the design of the cylinder type flywheel where mass is compressed and made
into a cylindrical flywheel and when mass is spread on a large area as shown in our design the flywheel is designed as a merry
go round disc.

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net

تحميل

يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول

التعليقات

اترك تعليقاً