Engineering Graphics with SOLIDWORKS – A Step-by-Step Project Based Approach
Utilizing 3D Solid Modeling
David C. Planchard, CSWP,
SOLIDWORKS Accredited Educator
TABLE OF CONTENTS
Introduction 1-1
About the Author 1-2
Dedication 1-3
Contact the Author 1-4
Note to Instructors 1-4
Trademarks, Disclaimer and Copyrighted Material 1-4
References 1-5
Table of Contents 1-6
Overview of Chapters 1-16
Chapter 1: History of Engineering Graphics 1-16
Chapter 2: Isometric Projection and Multi View Drawings 1-16
Chapter 3: Dimensioning Practices, Scales, Tolerancing and Fasteners 1-17
Chapter 4: Overview of SOLIDWORKS and the User Interface 1-18
Chapter 5: Introduction to SOLIDWORKS Part Modeling 1-18
Chapter 6: Revolved Boss/Base Features 1-19
Chapter 7: Swept, Lofted, Rib, Mirror and Additional Features 1-19
Chapter 8: Assembly Fundamentals – Bottom-up method 1-19
Chapter 9: Fundamentals of Drawing 1-20
Chapter 10: Introduction to the (CSWA) Exam 1-20
Chapter 11: Additive Manufacturing – 3D Printing 1-21
About the Book 1-22
Windows Terminology in SOLIDWORKS 1-23
Chapter 1 – History of Engineering Graphics 1-1
Chapter Overview 1-3
History of Engineering Graphics 1 -3
Global and Local Coordinate System 1-6
2-Dimensional Cartesian Coordinate System 1-7
3-Dimensional Cartesian Coordinate System 1-8
Absolute Coordinates 1-10
Relative Coordinates 1-10
Polar Coordinates 1-11
Cylindrical and Spherical Coordinates 1-11
Freehand Sketching 1-12
General Sketching Techniques 1-13
Geometric Entities 1-14
Points 1-14
Lines 1-14
Planes 1-15
Circles 1-15
Arcs 1-16
Solid Primitives 1-16
Alphabet of Lines 1-17
Visible lines 1-17
Hidden lines 1-17
Dimension lines 1-18
Extension lines 1-18
PAGE I – 6Engineering Graphics with SOLIDWORKS® 2021 Introduction
Leader lines 1-19
Break lines 1-20
Centerlines 1-20
Phantom lines 1-21
Section lines 1-21
Cutting Plane lines 1-22
Precedence of Line Types 1 -23
Alphabet of Lines Exercises 1-25
Projections in General 1-27
Projection Types 1-29
Parallel Projection 1-29
Perspective Projection 1-29
Orthographic Projection 1-29
Oblique Projection 1-29
Multi-view Projection 1-30
Orient and Select the Front View 1-30
Orthographic Projection (Third Angle) 1-31
Glass Box and Six Principal Orthographic Views 1-32
Height, Width and Depth Dimensions 1-35
Transferring Dimensions 1-35
Sheet Media 1-36
ANSI Standard Sheet Sizes 1-36
Orthographic Projection Exercises 1-37
Planes (Normal, Inclined and Oblique) 1-42
Plane Exercises 1-43
Chapter Summary 1-49
Questions/Exercises 1-51
Chapter 2 – Isometric Projection and Multi View Drawings 2-1
Chapter Overview 2-3
Isometric Projections 2-3
Isometric Sketching 2-5
Circles Drawn in Axonometric View 2-7
Additional Projections 2-9
Oblique Projection 2-9
Arrangement of Views 2-13
Two View Drawing 2-14
One View Drawing 2-16
Drawing – Exercises 2-19
Drawing Views – Advanced 2-21
Section View 2-21
Detail View 2-23
Broken out View 2-24
Break or Broken View 2-25
Crop View 2-26
Auxiliary View 2-27
Exercises 2-27
History of Computer Aided Design (CAD) 2-28
Boolean Operations 2-29
What is SOLIDWORKS? 2-31
Design Intent 2-33
PAGE I – 7Introduction Engineering Graphics with SOLIDWORKS® 2021
Design Intent in a Sketch
Design Intent in a Feature
Design Intent in a Part
Design Intent in an Assembly
Design Intent in a Drawing
Chapter Summary
Questions/Exercises
2-33
2-34
2-34
2-35
2-35
2-36
2-37
Chapter 3 – Dimensioning Practices, Scales, Tolerancing and Fasteners
Chapter Overview
American National Standards Institute (ANSI)
Dimensioning
Location Dimension
Size Dimension
Measurement – units
Metric/SI
English
Dual Dimensioning
Scale
Architect’s Scale
Engineer’s Scale
Linear Encoder
Linear Scale
Vernier Scale
Standards for Dimensioning
Linear Dimension
Stagger Dimension
Aligned Dimension
Angular Dimension
Chamfer Dimension
Slot Dimension
Radius Dimension (Leader line)
Simple Hole Dimension (Leader line)
Fastener Hole Dimension (Annotations)
Cylindrical Dimension
Equally Spaced Hole Dimension
Hole Dimension Location
Point/Center of a Circle Dimension
Arc Dimension
Order of Preference – Linear Dimension Line
Precision
Size Dimension
Continuous Dimensions
Principles of good Dimensioning
Precision and Tolerance
Tolerance for a Drawing
General Tolerance – Title Block
Local Tolerance – Dimension
Limit Tolerance
Unilateral Tolerance
Bilateral Tolerance
3-1
3-3
3-3
3-4
3-4
3-4
3-5
3-5
3-5
3-6
3-7
3-7
3-7
3-7
3-7
3-7
3-8
3-8
3-8
3-9
3-9
3-10
3-10
3-11
3-12
3-13
3-13
3-15
3-15
3-16
3-16
3-17
3-17
3-18
3-19
3-20
3-26
3-27
3-27
3-28
3-28
3-29
3-29
PAGE I – 8Engineering Graphics with SOLIDWORKS® 2021 Introduction
Formatting Inch Tolerances 3-29
Metric Dimension Specifications 3-30
Tolerance Parts and Important Terms 3-30
Fit – Hole Tolerance 3-32
Fit Types between Mating Parts 3-32
Clearance Fit 3-33
Interference Fit 3-33
Transition Fit 3-33
Fasteners in General 3-34
Representing External (Male) Threads 3-37
Cutting External (Male) Threads 3-38
Die 3-38
Lathe 3-38
Representing Internal (Female) Threads 3-39
Cutting Internal (Female) Threads 3-39
Taper 3-40
Plug 3-40
Bottoming 3-40
American National Standard and Unified Screw Threads 3-41
Single vs. Double or Triple Threads 3-41
Pitch and Major Diameter 3-42
Thread Class of Fit 3-42
Class 1 3-42
Class 2 3-42
Class 3 3-42
General Thread Notes 3-43
Dimensioning a CounterBore Hole 3-44
Dimensioning a CounterSunk Hole 3-44
Chapter Summary 3-45
Questions/Exercises 3-46
Chapter 4 – Overview of SOLIDWORKS and the User Interface 4-1
Chapter Objective 4-3
What is SOLIDWORKS? 4-3
Basic concepts in SOLIDWORKS 4-3
Start a SOLIDWORKS Session 4-4
Tutorial: Start a SOLIDWORKS Session 4-4
Welcome dialog box 4-4
Home Tab 4-5
Recent Tab 4-5
Learn Tab 4-5
Alerts Tab 4-6
SOLIDWORKS User Interface (UI) and CommandManager 4-7
Menu Bar toolbar 4-8
Menu Bar menu 4-8
Drop-down menu 4-8
Create a New Part Document 4-9
Novice Mode 4-10
Advanced Mode 4-10
Graphic Window (Default) 4-11
View Default Sketch Planes 4-12
PAGE I – 9Introduction Engineering Graphics with SOLIDWORKS® 2021
Open a Part 4-12
Part FeatureManager 4-13
FeatureManager Rollback Bar 4-13
Heads-up View toolbar 4-15
Dynamic Annotation Views 4-15
Zoom to Fit 4-15
Zoom to Area 4-15
Window-Select 4-15
Rotate 4-15
Front View 4-16
Right View 4-16
Top View 4-16
Trimetric view 4-16
SOLIDWORKS Help 4-16
SOLIDWORKS Tutorials 4-17
User Interface Tools 4-17
Right-click 4-18
Consolidated toolbar 4-18
System feedback icons 4-18
Confirmation Comer 4-19
Heads-up View toolbar 4-19
CommandManager (Default Part tab) 4-22
CommandManager (Default Drawing tab) 4-23
CommandManager (Default Assembly tab) 4-24
CommandManager (Float/Fit) 4-25
Collapse the CommandManager 4-25
FeatureManager Design Tree 4-26
FeatureManager design tree tab 4-26
PropertyManager tab 4-26
Configuration Manager tab 4-26
DimXpertManager tab 4-26
DisplayManager tab 4-26
CAM tab 4-26
Hide/Show tab 4-26
Sensors tool 4-26
Tags 4-27
Split 4-27
Fly-out FeatureManager 4-28
Task Pane 4-29
SOLIDWORKS Resources 4-29
Design Library 4-30
File Explorer 4-30
Search 4-31
View Palette 4-31
Appearances, Scenes and Decals 4-31
Custom Properties 4-32
SOLIDWORKS Forum 4-32
3DEXPERIENCE MARKETPLACE 4-32
Motion Study tab 4-32
3D Views tab 4-34
Dynamic Reference Visualization 4-34
PAGE I-10Engineering Graphics with SOLIDWORKS® 2021 Introduction
Mouse Movements 4-35
Single-Click 4-35
Double-Click 4-35
Right-Click 4-35
Scroll Wheel 4-35
Summary 4-36
Chapter 5 – Introduction to SOLIDWORKS Part Modeling 5-1
Chapter Overview 5-3
File Management 5-4
Start a SOLIDWORKS Session and Open a New Part Document 5-5
Part Template 5-5
BATTERY Part 5-11
BATTERY Part-Extruded Boss/Base Feature 5-13
BATTERY Part-Fillet Feature Edge 5-17
BATTERY Part-Extruded Cut Feature 5-19
BATTERY Part-Second Fillet Feature 5-21
BATTERY Part Extruded-Boss/Base Feature 5-22
BATTERYPLATE Part 5-28
Save As, Delete, Edit Feature and Modify 5-29
BATTERYPLATE Part-Extruded Boss Feature 5-31
BATTERYPLATE Part-Fillet Features: Full Round and Multiple Radius Options 5-32
Multi-body Parts and Extruded Boss/Base Feature 5-35
Chapter Summary 5-36
Questions/Exercises 5-38
Chapter 6 – Revolved Boss/Base Features 6-1
Chapter Overview 6-3
LENS Part 6-4
LENS Part Revolved Boss/Base Feature 6-5
LENS Part-Shell Feature 6-8
LENS Part-Extruded Boss/Base Feature and Convert Entities Sketch tool 6-9
LENS Part-Hole Wizard Feature 6-10
LENS Part-Revolved Boss Thin Feature 6-12
LENS Part-Extruded Boss/Base Feature and Offset Entities 6-14
LENS Part-Extruded Boss Feature and Transparency 6-16
LENS Part-Transparent Optical Property 6-16
BULB Part 6-18
BULB Part-Revolved Base Feature 6-19
BULB Part-Revolved Boss Feature and Spline Sketch tool 6-21
BULB Part-Revolved Cut Thin Feature 6-23
BULB Part-Dome Feature 6-25
BULB Part-Circular Pattern Feature 6-26
BULB Part-Seed Cut Feature 6-26
BULB Part-Extruded Cut Feature 6-28
BULB Part-Circular Pattern Feature 6-29
Customizing Toolbars and Short Cut Keys 6-30
Chapter Summary 6-32
Questions/Exercises 6-33
PAGE I-11Introduction Engineering Graphics with SOLIDWORKS® 2021
Chapter 7 – Swept, Lofted, Rib, Mirror and Additional Features 7-1
Chapter Overview 7-3
O-RING Part-Swept Base Feature 7-4
SWITCH Part-Lofted Base Feature 7-7
SWITCH Part-Dome Feature 7-12
Four Major Categories of Solid Features 7-14
LENSCAP Part 7-14
LENSCAP Part-Extruded Boss/Base, Extruded Cut and Shell Features 7-15
LENSCAP Part-Revolved Thin Cut Feature 7-18
LENSCAP Part-Thread, Swept Feature and Helix/Spiral Curve 7-19
HOUSING Part 7-25
HOUSING Part-Extruded Base Feature 7-27
HOUSING Part-Lofted Boss Feature 7-28
HOUSING Part-Second Extruded Boss/Base Feature 7-32
HOUSING Part-Shell Feature 7-33
HOUSING Part-Third Extruded Boss/Base Feature 7-34
HOUSING Part-Draft Feature 7-35
HOUSING Part-Threads and Swept Feature 7-37
HOUSING Part-Handle with Swept Feature 7-42
HOUSING Part-Extruded Cut Feature with Up To Surface Option 7-47
HOUSING Part-First Rib and Linear Pattern Feature 7-49
HOUSING Part-Second Rib Feature 7-52
HOUSING Part-Mirror Feature 7-55
Chapter Summary 7-58
Questions/Exercises 7-60
Chapter 8 – Assembly Modeling – Bottom up method 8-1
Chapter Overview 8-3
Assembly Modeling Overview 8-4
FLASHLIGHT Assembly 8-6
Assembly Techniques 8-7
Assembly Template 8-8
Assembly Templates-ASM-IN-ANSI 8-8
Assembly Templates-ASM-MM-ISO 8-9
LENSANDBULB Sub-assembly 8-10
BATTERYANDPLATE Sub-assembly 8-14
CAPANDLENS Sub-assembly 8-16
FLASHLIGHT Assembly 8-20
FLASHLIGHT Assembly-Addressing Interference Issues 8-26
FLASHLIGHT Assembly-Exploded View 8-28
FLASHLIGHT Assembly-Export Files and eDrawings 8-30
Chapter Summary 8-33
Questions/Exercises 8-34
Chapter 9 – Fundamentals of Drawing 9-1
Chapter Overview 9-3
New Drawing and the Drawing Template 9-4
Title Block 9-7
Company Logo and Save Sheet Format 9-11
BATTERY Drawing 9-15
BATTERY Drawing – Insert a View 9-16
PAGE I -12Engineering Graphics with SOLIDWORKS® 2021 Introduction
BATTERY Drawing – Detail View 9-19
BATTERY Drawing – View Display 9-20
BATTERY Drawing – Insert Model Items and Move Dimensions 9-22
BATTERY Drawing – Insert a Note 9-23
New Assembly Drawing and Exploded View 9-25
FLASHLIGHT Drawing – Bill of Materials and Balloons 9-28
Part Numbers 9-29
FLASHLIGHT Drawing – ConfigurationManager 9-30
FLASHLIGHT Drawing – Update the Bill of Materials 9-30
Design Tables and O-RING Design-Table Drawing 9-32
O-RING Drawing 9-34
O-RING Drawing – Design Table 9-35
Add a Center of Mass point 9-36
Chapter Summary 9-37
Questions/Exercises 9-38
Chapter 10 – Introduction to the Certified Associated – Mechanical Design Exam 10-1
Chapter Objective 10-3
Introduction 10-3
Part 1 ofthe Exam 10-4
Basic Part Creation and Modification, Intermediate Part Creation and Modification 10-4
Assembly Creation and Modification 10-6
Part 2 ofthe Exam 10-7
Introduction and Drafting Competencies 10-7
Advanced Part Creating and Modification 10-8
Assembly Creation and Modification 10-10
Intended Audience 10-11
During the Exam 10-12
Drafting Competencies 10-13
Example 1 10-13
Example 2 10-13
Example 3 10-14
Example 4 10-14
Examples 1 0-14
Example 6 10-14
Basic Part Creation and Modification, Intermediate Part Creation and Modification 10-15
Example 1 10-16
Example 2 10-17
Example 3 10-18
Example 4 10-19
Examples 1 0-20
Example 6 10-21
Example 6A 10-23
Example 6B 10-23
Advanced Part Creation and Modification 10-24
Example 1 10-24
Example 2 10-26
Example3 1 0-27
Example 4 10-28
Examples 1 0-29
Example 6 10-31
PAGE I-13Introduction Engineering Graphics with SOLIDWORKS® 2021
Example 6A
Assembly Creation and Modification
Example 1
10-32
10-33
10-34
Chapter 11 – Additive Manufacturing – 3D Printing
Chapter Objective
Additive vs. Subtractive Manufacturing
3D Printer Technology
Stages of 3D Printing
Fused Filament Fabrication (FFF)
StereoLithography (SLA)
Selective Laser Sintering (SLS)
Select the Correct Filament Material for FFF
PLA (Polylactic Acid)
Flex/Soft PLA
PLA Storage
PLA Part Accuracy
ABS (Acrylonitrile-Butadiene-Styrene)
ABS Storage
ABS Part Accuracy
Nylon
Nylon 618
Nylon 645
Nylon Storage
Nylon Accuracy
PVA (Polyvinyl Alcohol)
STereoLithography ( * .stl) file
Save an STL ( * stl) file
Additive Manufacturing ( * amf) file
Save an Additive Manufacturing ( * amf) file
3D Manufacturing Format ( * .3mf) file
Save a 3D Manufacturing Format ( * .3mf) file
What is a Slicer?
How does a Slicer Work?
Slicer Parameters
Layer Height
Shell (Wall) Thickness
Infill Density/Overlap
Infill Patterns
Print Speed
Support Types
Touching Buildplate
Everywhere
Bed Platform Adhesion
Raft
Skirt
Brim
Part Orientation
Example 1
Example 2
Optimize Print Direction
11-1
11-3
11-4
11-5
11-5
11-6
11-9
11-11
11-12
11-13
11-13
11-14
11-14
11-14
11-15
11-15
11-16
11-16
11-16
11-17
11-17
11-17
11-18
11-18
11-19
11-19
11-20
11-20
11-21
11-21
11-21
11-21
11-22
11-22
11-22
11-23
11-23
11-23
11-24
11-24
11-24
11-24
11-24
11-25
11-25
11-26
11-26
PAGE I -14Engineering Graphics with SOLIDWORKS® 2021 Introduction
Thin Region 11-26
Area of Overhang 11 -26
Amount of needed Support 11-26
Remove Model from the Build Plate 11-28
Non-heated Build Plate 11-28
Heated Build Plate 11-28
Know the Printer’s Limitations 11-29
Tolerance for Interlocking Parts 11-29
General Printing Tips 11-29
Reduce Infill/Overlap 11-29
Control Build Area Temperature 11-30
Add Pads 11-31
Safe Zone Rule 11-31
First Layer Not Sticking 11-31
Level Build Platform 11-32
Minimize Internal Support 11-32
Design a Water Tight Mesh 11 -32
Clearance 11-32
In General 11-33
Print Directly from SOLIDWORKS 11 -34
Add-in 11-34
SOLIDWORKS Additive Manufacturing Certification (CSWA-AM) 11-35
Summary 11-36
Appendix
SOLIDWORKS Keyboard Shortcuts A-l
Modeling – Best Practices A-3
Helpful On-Line Information A-5
SOLIDWORKS Document Types A-6
Glossary G-l
Index
X
2 D Cartesian Coordinate System, 1-7
3 D Cartesian Coordinate System, 1-8
3 Point Arc Sketch tool, 6-6
3D Drawing View Command, 4-21
3D Model, 4-9,11-4,11-7
3D Printing, 11-1
A
Absolute Coordinates, 1-10
Abscissa, 1-7
Accelerator Keys, 4-28
Actual Size – General Tolerance
Nomenclature, 3-31
Add a Dimension, 5-23
Add Transparency, 6-16
Add-Ins, 4-22, 4-30
Additive Manufacturing, 11-1
Advanced Mode, 4-10
Aligned Dimension, 3-9, 5-24
Allowance – General Tolerance
Nomenclature, 3-31
Alphabet of Lines, 1-17
Break Lines, 1-20
Centerlines, 1-20
Cutting Plane Lines, 1-22
Dimension Lines, 1-18
Extension Lines, 1-18
Hidden Lines, 1-17
Leader Lines, 1-19
Phantom Lines, 1-21
Section Lines, 1-21
Visible Lines, 1-17
American National Standard and Unified
Screw Thread, 3-41
American National Standards Institute, 3-3
Angle of Rotation, 6-13
Angular Dimension, 3-9, 5-25
Angular Tolerance, 9-10
Animation, 4-33
Annotations Folder, 7-13
ANSI Drafting Standard, 3-3, 5-6
Appearance Callout tool, 6-17
Appearances, Scenes and Decals, 4-31
Apply Scene Command, 4-21
Arc – Geometric Entities, 1-16
Arc Dimension, 3-16
ASM-IN-ANSI, 8-8
ASM-MM-ISO, 8-9
Assembly Exploded View, 9-25
Assembly Modeling Overview, 8-4
Assembly Techniques, 8-7
Assembly Template, 8-8
Auxiliary View, 2-27
Axis of Revolution, 6-4, 6-8, 6-13
Axonometric Projection, 2-3
Dimetric, 2-3, 2-4
Isometric, 2-3, 2-4
Trimetric, 2-3, 2-5
В
Back View, 1-33,1-34
Balloons, 9-27
Base Sketch, 5-13
Basic Dimension – General Tolerance
Nomenclature – 3-30
Basic Mechanics of Drafting, 1-5
Basic Motion, 4-33
Basic Size – General Tolerance
Nomenclature, 3-31
BATTERY Drawing, 9-15
Insert a Note, 9-23
Insert Model Items Feature, 9-22
Multiple views, 9-15
View Display, 9-20
BATTERY Part, 5-11
Extruded Boss/Base Feature, 5-13
Extruded Cut Feature, 5-19
First Fillet Feature, 5-17
Second Extruded Boss Feature, 5-25
Second Fillet Feature, 5-21
BATTERYANDPLATE, 8-14
BATTERYPLATE Part, 5-28
Delete, 5-29
Edit Feature, 5-30
Extruded Boss/Base Feature, 5-31
Fillet Feature, 5-32
Modify, 5-29
Save As, 5-29
Bent Leader Lines, 1-19
Bilateral Tolerance, 3-29
Bill of Materials, 9-27
Boolean Operation, 2-29
Difference, 2-30
Intersection, 2-30
Union, 2-29, 2-30
Boss-Extrude PropertyManager, 5-15
Bottom View, 1-31
Break Lines, 1-20,1-23,1-24
Break or Broken View, 2-25
Broken out View, 2-24
BULB Part, 6-18
Circular Pattern Feature, 6-26, 6-29
Dome Feature, 6-25
Extruded Cut Feature, 6-28
INDEX -1Index Engineering Graphics with SOLIDWORKS 2021
Revolved Base Feature, 6-19
Revolved Boss Feature, 6-21
Revolved Thin Cut Feature, 6-23
Seed Feature, 6-26
C
CAPANDLENS Sub-assembly, 8-16
Cartesian Coordinates, 1-7
2 Dimensional, 1-7
3 Dimensional, 1-8
Absolute Coordinates, 1-10
Cylindrical / Spherical Coordinates, 1-11
Polar Coordinates, 1-11
Relative Coordinates, 1-10
Cartesian Plane, 1-7
Cbore Hole, 6-10
Center Rectangle Sketch tool, 5-14, 7-9
Centerline Sketch tool, 5-24, 6-6, 6-20
Centerlines – Alphabet of Lines, 1-20
Centerpoint Arc Sketch tool, 6-13
Chamfer Dimension, 3-10
Check Sketch tool, 6-7
Child, 2-23, 2-26
Circle – Geometric Entities, 1-15
Circle Sketch tool, 5-23, 7-5
Circular Pattern Feature, 6-26
Class 1 – Thread Class, 3-42
Class 2 – Thread Class, 3-42
Class 3 – Thread Class, 3-42
Clearance Fit, 3-32, 3-33
Close All Documents, 5-9
Coincident Geometric Relation, 6-10,
6-11,6-23
Coincident Mate, 8-12, 8-14
CommandManager – Assembly, 4-24
Assembly tab, 4-24
Evaluate tab, 4-24
Layout tab, 4-24
Sketch tab, 4-24
SOLIDWORKS Add-In tab, 4-24
CommandManager – Dock, 4-25
CommandManager – Drawing, 4-23
Annotation tab, 4-23
Evaluate tab, 4-23
Sketch tab, 4-23
SOLIDWORKS Add-in tab, 4-23
View Layout tab, 4-23
CommandManager – Float, 4-25
CommandManager – Part, 4-22
DimXpert tab, 4-22
Evaluate tab, 4-22
Feature tab, 5-11
Sketch tab, 4-22
SOLIDWORKS Add-In tab, 4-24
Component, 8-4
Concentric Mate, 8-14
ConfigurationManager tab, 4-26
Confirmation Corner, 4-19
Consolidated toolbar, 4-18
Construction Dimensions, 3-4
Continuous Dimensions, 3-19
Control Points, 1-19
Convert Entities Sketch tool, 6-10, 6-17
Coordinate Axis, 1-9
Coordinate System – Left-hand, 1-8,1-9
Coordinate System – Right-hand, 1-8,1-9
Copy Sketch, 5-23
Copy tool, 5-23
Cosmetric Thread, 5-47
Counterbore Hole, 3-44
Countersunk Hole, 3-44
Create a new part, 4-10, 5-14
Create an Assembly Template, 8-8
Crop View, 2-26
CSWA Certification, 10-1
CSWA Exam, 10-1
Content, 10-4
Intended Audience, 10-11
Introduction, 10-3
Advanced Part and Modification, 10-24
Assembly and Modification, 10-33
Basic Part and Modification, 10-15
Drafting Competencies, 10-13
Intermediate Part/Modification, 10-15
Custom Properties, 5-5
Custom Scale Box, 9-19
Customize CommandManager, 4-23
Customize FeatureManager, 4-27
Customizing Short Cut Keys, 6-30
Customizing Toolbars, 6-30
Cutting Plane Lines, 1-22,1-23
Cylindrical Dimension, 3-13
Cylindrical I Spherical Coordinates, 1-11
D
Default Reference Planes, 4-11,4-12
Front Plane, 4-12
Right Plane, 4-12
Top Plane, 4-12
Delete Feature, 5-29
Depth Dimension, 1-32
Design Intent, 2-33
Assembly, 2-35
Drawing, 2-35
Feature, 2-34
Part, 2-34
Sketch, 2-33
Design Library, 4-30
SolidWorks Content, 4-30
Toolbox, 4-30
Design Table, 9-32
Detail Drawing View, 9-19
INDEX – 2Engineering Graphics with SOLIDWORKS 2021 Index
Detail View tool, 9-19
Detail View, 2-23
Difference – Boolean Operation, 2-30
Dimension – Angular, 3-9, 3-10
Dimension – Arc, 3-16
Dimension – Chamfer, 3-10
Dimension – Cylindrical, 3-13
Dimension – Dual units, 3-6
Dimension – Fastener Hole, 3-13
Dimension – Linear, 3-8
Dimension – Local Tolerance, 3-28
Dimension – Tolerance, 3-26
Dimension – Radius, 3-11
Dimension – Simple Hole, 3-11
Dimension – Slot, 3-10
Dimension System – Metric, 3-5
Dimension System – U.S., 3-5
Dimetric Projection, 2-3, 2-4
DimXpertManager tab, 4-28
Display dimensions, 7-13
Display Style, 4-20
Hidden Lines Removed, 4-20
Hidden Lines Visible, 4-20
Shaded With Edges, 4-20
Shaded, 4-20
Wireframe, 4-20
DisplayManager tab, 4-26
Distance Mate, 8-18, 8-21
Dock CommandManager, 4-25
Document Properties, 5-5, 5-6
Dome Feature, 6-25
Dome PropertyManager, 6-25
Double Thread, 3-41
Draft Feature, 7-36
Draft option, 5-25
Draft PropertyManager, 7-36, 7-37
Drafting Tables, 1-5
Drafting Tools, 1-5,1-6
Drafting Triangle, 1-6
DraftXpert PropertyManager, 7-36
Drawing – Tolerance, 3-27
Drawing Sheet icon, 9-18
Drawing Template, 9-4
Drawing View display, 9-20
Drawing View icon, 9-18
Drop-down menu, 4-8, 4-17, 4-28
Dual – Dimensioning System, 3-6
Dynamic Mirror Sketch tool, 6-27
Ellipse – Minor Axis, 2-7
Ellipse, 2-6, 2-7
End Chain, 6-6
Equal Geometric Relation, 6-7, 7-9
Equal Relation, 5-24
Exit Sketch, 5-15, 7-10
Exploded View, 8-27
Export Files, 8-30
Extension Lines, 1-18
Extension Lines/Lead Lines, 1-23
Extruded Cut Feature, 5-19, 5-20
F
Fastener Hole Dimension, 3-13
Fasteners in General, 3-34
Counterbore, 3-44
Countersunk, 3-44
Double Thread, 3-41
Female, 3-39
Fit, 3-32
Major Diameter, 3-38
Male, 3-37, 3-38
Pitch, 3-42, 3-43
Single Thread, 3-41
Thread Class, 3-42
Thread Notes, 3-37, 3-43
Triple Thread, 3-41
Features, 4-9, 5-11
Circular Pattern, 6-26
Cosmetic Thread, 5-47
Dome, 6-25, 7-12
Draft, 7-35
Extruded Boss, 5-25, 5-32, 6-10
Extruded Boss/Base, 5-15, 5-32
Extruded Cut, 5-19
Fillet, 5-17, 5-32
Helix and Spiral, 7-19, 7-20, 7-39
Hole Wizard, 6-10
Linear Pattern, 7-50
Loft Base, 7-8, 7-13
Loft Boss, 7-26
Mirror, 7-56
Plane, 7-28, 7-52
Revolved Base, 6-5,6-8, 6-19
Revolved Boss Thin Feature, 6-13
Revolved Boss, 6-21
Revolved Thin Cut, 6-23
Rib, 7-50, 7-55
Shell, 6-8, 7-15, 7-17, 7-33
E
Edit Command – Menu Bar Menu, 4-8
Edit Feature, 5-15, 6-29
Edit Sheet Format Mode, 9-3
Edit Sheet Mode, 9-4
eDrawings, 8-30
Ellipse – Major Axis, 2-7
Swept Base, 7-3, 7-4
Feature Statistics Dialog box, 7-13
FeatureManager Design Tree, 4-26
ConfigurationManager tab, 4-26
DimXpertManager tab, 4-26
DisplayManager tab, 4-26
FeatureManager tab, 4-26
INDEX-3Index Engineering Graphics with SOLIDWORKS 2021
PropertyManager tab, 4-26
FeatureManager tab, 4-26
Female Thread – Fastener, 3-39
File Command – Menu Bar Menu, 4-8
File Explorer, 4-29, 4-30
File Location, 5-6
File Management, 5-4
File Properties Document Command, 5-6
Fillet Feature, 5-32
Full Round, 5-32
Multiple radius, 5-32
Fillet Folder, 5-35
Fillet PropertyManager, 5-33
First Angle Projection, 1-34, 9-5
Fit – General Tolerance, 3-27
Fit – Thread Class, 3-42
Fit the model, 5-21, 5-25, 5-30
Fits, 3-32, 3-33, 3-42
Clearance, 3-32, 3-33
Interference, 3-32, 3-33
Transition, 3-32, 3-33
FLASHLIGHT Assembly, 8-6, 8-20
FLASHLIGHT Drawing, 9-25
Balloons, 9-29
Bill of Materials, 9-28
ConfigurationManager, 9-30
Exploded view, 9-26
Part number, 9-29
Float CommandManager, 4-25
Fly-out FeatureManager, 4-28
Font Size, 9-9
Formatting Dialog box, 9-26
Formatting Inch Tolerances, 3-29
Freehand Sketching, 1-4,1-12
Front View, 1-31
G
Gaspard Monge’s, 1-33
General Sketching Techniques, 1-13
General Thread Notes, 3-37, 3-38, 3-39
General Tolerance – Title Block, 3-27
General Tolerance Nomenclature, 3-27
Actual Size, 3-31
Allowance, 3-31
Basic Dimension, 3-31
Basic Size, 3-31
Fit, 3-32
Least Material Condition, 3-31
Maximum Material Condition, 3-31
Nominal Size, 3-31
Tolerance, 3-31
Geometric Entities, 1-14
Arc, 1-16
Circle, 1-15
Line, 1-14
Plane, 1-15
Point, 1-14
Geometric Relation – Coincident, 6-11
Geometric Relation – Equal, 6-7, 7-9
Geometric Relation – Horizontal, 7-45
Geometric Relation – Intersection, 7-43
Geometric Relation – Perpendicular, 6-28
Geometric Relation – Pierce, 7-4, 7-23
Geometric Relation – Tangent, 7-10
Geometric Relation – Vertical, 7-47
Geometry Pattern option, 7-51
Glass Box Method, 1-32
Global Coordinate System, 1-6
Graphics Window, 4-11
Heads-up View toolbar, 4-11
CommandManager, 4-11
FeatureManager, 4-11
Origin, 4-11
Tag, 4-11,4-27
Task Pane, 4-11,4-29
H
Heads-up View toolbar, 4-19
3D Drawing View, 4-21
Apply Scene, 4-21
Edit Appearance, 4-21
Hide/Show Items, 4-21
Previous View, 4-19
Rotate, 4-15, 4-21
Section View, 4-20
View Orientation, 4-20
View Setting, 4-21
Zoom to Area, 4-19
Zoom to Fit, 4-19
Height Dimension, 1-35
Helix and Spiral Feature, 7-39
Help Command – Menu bar menu, 4-8
Hidden Lines, 1-17,1-23, 4-20
Hidden Lines Visible, 4-20, 7-17
Hide a Plane, 5-25
Hide Command, 5-25
Hide Components, 8-17
Hide FeatureManager Tree, 4-11
Hide Planes, 7-8, 7-11
History of CAD, 2-28
History of Engineering Graphics, 1-3
Hole Dimension location, 3-12, 3-15
Hole Wizard Feature, 5-48, 6-10
Horizontal Geometric relation, 7-44
HOUSING Part, 7-25
Draft Feature, 7-35
Extruded Base Feature, 7-27
First Extruded Boss Feature, 7-32
First Rib Feature, 7-49
First Swept Boss Feature, 7-41
First Swept Feature, 7-42
Helix and Spiral Feature, 7-39
INDEX – 4Engineering Graphics with SOLIDWORKS 2021 Index
Linear Pattern Feature, 7-49
Loft Boss Feature, 7-28, 7-31
Mirror Feature, 7-55
Second Extruded Boss Feature, 7-32
Second Extruded Cut Feature, 7-47
Second Rib Feature, 7-52
Second Swept Feature, 7-42
Shell Feature, 7-33
l&J&K
Inclined Plane, 1-42
Insert a Component, 8-11
Insert a Reference Plane, 7-8
Insert Command – Menu bar menu, 4-8
Insert Component tool, 8-11, 8-15, 8-17
Insert Model Items, 9-21
Interference Detection tool, 8-26
Interference Fit, 3-32, 3-33
International System – Dimensioning, 3-5
Intersection – Boolean Operation, 2-30
Intersection Geometric relation, 7-43
IPS (inch, pound, second), 3-6, 5-42
IPS Dimensioning System, 3-6
Isometric Projection, 2-3, 2-4
Isometric Sketching, 2-5
L
Leader Line, 1-19, 3-11
Least Material Condition – General
Tolerance Nomenclature, 3-31
Left-hand Coordinate System, 1-8,1-9
Left-handed Thread, 3-41
LENS Part, 6-4
First Extruded Boss Feature, 6-9
Hole Wizard Feature, 6-10
Revolved Base Feature, 6-5, 6-8
Revolved Boss Thin Feature, 6-12
Second Extruded Boss Feature, 6-14
Shell Feature, 6-8
Transparent Optical Property, 6-16
LENSANDBULB Sub-assembly, 8-10
LENSCAP Part, 7-15
Extruded Base Feature, 7-16
Extruded Cut Feature, 7-17
Helix/Spiral Feature, 7-21
Revolved Thin Cut Feature, 7-18
Shell Feature, 7-17
Limit Tolerance, 3-28
Limits, 3-28, 3-31
Line – Geometric Entities, 1-14
Line Sketch tool, 6-6, 6-20, 6-23
Linear Dimension, 3-8
Linear Pattern Feature, 7-50
Linear Pattern PropertyManager, 7-51
Link to Property tool, 9-8
Local Coordinate System, 1-6
Local Tolerance – Dimension, 3-28
Location Dimension, 3-4
Loft Base Feature, 7-11
Loft Boss Feature, 7-28, 7-31
M
Major Diameter – Fastener, 3-38
Male Thread – Fastener, 3-37
Mate tool, 8-16, 8-18, 8-21, 8-23
Maximum Material Condition, 3-31
Measurement – units, 3-5
Dual, 3-6
English, 3-5
Metric, 3-5
Measure tool – Units/Precision, 5-26
Measure tool, 5-26
Mechanical Mates, 8-5
Menu Bar Menu, 4-8
Edit, 4-8
File, 4-8
Help, 4-8
Insert, 4-8
Pin, 4-8
View, 4-8
Window, 4-8
Menu Bar toolbar, 4-7
File Properties, 4-8
New, 4-7
Open, 4-7
Options, 4-8
Print, 4-7
Rebuild, 4-7
Save, 4-7
Select, 4-7
Undo, 4-7
Metric – Dimensioning System, 3-5
Metric ANSI – Dimensioning System, 3-4
Metric Dimension Specifications, 3-30
Mirror Entities Sketch tool, 7-30, 7-45
Mirror Feature, 7-56
MMGS, 3-5, 5-42
Model View tool, 9-16
Modify a Feature, 5-29
Modify drawing view scale, 9-26
Motion Study tab, 4-32
Animation, 4-33
Basic Motion, 4-33
MotionManager, 4-33
Animation, 4-33
Basic Motion, 4-33
Mouse Scroll Wheel, 4-35
Move drawing dimensions, 9-21
Multi-body Parts, 5-35
Multiple drawing views, 9-15
Multiple Radius Fillet feature, 5-32
MY-TEMPLATES Folder, 5-4
INDEX – 5Index Engineering Graphics with SOLIDWORKS 2021
N
New Document Command, 4-10
New Drawing, 9-5
New Motion Study tool, 4-33
New Part, 4-10, 6-5, 7-4
New View tool, 4-21
Nominal Size, 3-31
Normal Plane, 1-42
Novice Mode, 4-10
О
Oblique Plane, 1-42
Oblique Projection, 2-9
Cabinet, 2-9
Cavalier, 2-9
Offset Entities Sketch tool, 5-19
Offset Plane, 7-20, 7-28
One View Drawing, 2-16
Open Document Command, 4-12
Optical Properties dialog box, 6-16
Options Command, 4-7,4-8, 5-6
Ordinate, 1-7
Order/Placement – Dimension lines, 3-17
Origin, 1-7, 4-11,7-5, 7-35
O-RING Part, 7-4
Design Table, 9-32
Swept Base feature, 7-4
O-RING-DESIGN-TABLE Drawing, 9-35
Orthographic Projection, 1-31
Back I Rear View, 1-31
Bottom View, 1-31
Front View, 1-31
Left View, 1-31
Right View, 1-31
Top View, 1-31
Overall Drafting Standard, 5-6, 5-7
P&Q
Parallel Lines, 1-5
Parent, 2-23, 2-26
Part Template, 5-6
PART-IN-ANSI Template, 5-6, 5-7
PART-IN-ANSI, 5-6, 5-7
PART-MM-ISO Template, 5-7, 5-8
PART-MM-ISO, 5-7, 5-8
Paste a Sketch, 7-40
Perpendicular Geometric Relation, 6-28
Perspective Projection, 2-11
One point, 2-12
Three point, 2-13
Two point, 2-12
Phantom Lines, 1-22, 1-24
Pierce Geometric Relation, 7-4, 7-23, 7-40
Pitch – Fastener, 3-42
Plane – Geometric Entities, 1-15
Plane Feature, 7-28, 7-52
Plane PropertyManager, 7-8, 7-20, 7-38
Planes – Inclined, 1-42
Planes – Normal, 1-42
Planes – Oblique, 1-42
Plus-minus Tolerance, 3-29
Point – Geometric Entities, 1-14
Point of intersection, 1-7
Point Sketch tool, 7-11
Polar Coordinates, 1-11
Power Trim, 6-27
Precedence of Line Types, 1-23
Break Lines, 1-23
Centerlines, 1-23
Cutting Plane Lines, 1-23
Dimension Lines, 1-23
Extension Lines/Lead Lines, 1-23
Hidden Lines, 1-23
Section Lines/Crosshatch Lines, 1-22
Visible Lines, 1-22
Precision, 3-26
Primary Units, 3-6
Print Document Command, 4-7
Projection Lines – Transferring
Dimensions, 1-35
PROJECTS Folder, 5-4
PropertyManager tab, 4-26
Quadrants, 1-8,1-33
R
Radius Dimension, 3-11
Rebuild Document Command, 4-7, 5-29
Rebuild Sketch, 7-5
Reference Dimension, 3-8
Reference Planes, 4-11, 7-8
Front Plane, 4-11
Right Plane, 4-11
Top Plane, 4-11
Relative Coordinates, 1-10
Rename a Feature, 5-16
Revolved Base Feature, 6-5,6-8, 6-19
Revolved Boss Feature, 6-21
Revolved Boss Thin Feature, 6-12, 6-13
Revolved Cut Feature, 6-23, 7-19
Revolved Thin Cut Feature, 6-23
Rib Feature, 7-49, 7-55
Rib PropertyManager, 7-50
Right View, 1-31
Right-click Select tool, 4-35, 6-7
Right-click, 4-18
Right-hand Coordinate System, 1-8,1-9
Right-hand Thread, 3-41
Rotate Part, 4-15
Rotate Component tool, 8-23
S
S.l Dimensioning System, 3-5
INDEX – 6Engineering Graphics with SOLIDWORKS 2021 Index
Save As Command, 5-29, 5-30
Save Document Command, 4-7
Save Sheet Format, 9-11
Scales, 3-7
Architect’s Scale, 3-7
Engineer’s Scale, 3-7
Linear encoder, 3-7
Linear Scale, 3-7
Vernier Scale, 3-7
Screw Thread, 3-37
Secondary Units, 3-6
Section Lines, 1-21,1-23
Section View, 2-21, 6-12
Seed Feature, 6-28
Selection Filter tool, 5-27
Sensors tool, 4-26
Shaded With Edges, 4-20
Shaded, 4-20
Sheet Properties, 9-6
Shell Feature, 6-8, 7-17, 7-33
Shell PropertyManager, 7-17
Show Components, 8-19
Show Feature Dimensions, 7-13
Show Plane, 6-6, 7-28
Show Temporary Axes, 6-22
Show tool, 6-6
Silhouette Edge, 6-13, 7-18, 7-54
Simple Hole – Dimension, 3-11, 3-12
Single Thread, 3-41
Six Principal Orthographic Views, 1-32
Size Dimension, 3-4
Sketch Fillet Sketch tool, 7-29, 7-42
Sketch Plane, 5-13, 5-14
Sketch Relations, 5-14
Sketch Status, 5-16
Currently selected, 5-16
Fully defined, 5-16
Over defined, 5-16
Under defined, 5-16
Sketch tool – 3 Point Arc, 6-6
Sketch tool – Center Rectangle, 7-9
Sketch tool – Centerline, 6-6, 6-20
Sketch tool – Centerpoint Arc, 6-13
Sketch tool – Circle, 7-5
Sketch tool – Convert Entities, 6-10, 6-17
Sketch tool – Dynamic Mirror, 6-27
Sketch tool – Line, 6-6, 6-20
Sketch tool – Mirror Entities, 7-30, 7-45
Sketch tool – Offset Entities, 5-19, 6-15
Sketch tool – Point, 7-11
Sketch tool – Sketch Fillet, 7-29,7-42
Sketch tool – Smart Dimension, 5-15, 6-7
Sketch tool – Spline, 6-21
Sketch tool – Tangent Arc, 7-44, 7-54
Sketch tool – Trim Entities, 6-27, 7-30
Slot Dimension, 3-10
Smart Dimension Sketch tool, 5-15, 6-7
Solid Primitives, 1-16
Box, 1-16
Cone, 1-16
Cylinder, 1-16
Pyramid, 1-16
Sphere, 1-16
Torus, 1-16
Wedge, 1-16
SOLIDWORKS Help, 4-16, 4-17
SOLIDWORKS Resources, 4-29
SOLIDWORKS Tutorials, 4-17
SOLIDWORKS User Interface, 4-11
Confirmation Corner, 4-19
Consolidated drop-down menu, 4-18
Drop-down menu, 4-8
FeatureManager Design Tree, 4-13,4-26
Fly-out FeatureManager, 4-28
Graphics window, 4-11
Heads-up View toolbar, 4-11,4-15
Menu Bar Menu, 4-8
Menu Bar toolbar, 4-8
Motion Study tab, 4-32
New, 4-7
Open, 4-7
Options, 4-8
Print, 4-7
Rebuild, 4-7
Reference triad, 4-11
Right-click Pop-up menu, 4-14,4-18
Save, 4-7
Tags, 4-11
Task Pane, 4-11,4-29
Undo, 4-7
Spline Sketch tool, 6-21
Split FeatureManager, 4-27
Stagger dimension, 3-8
Standard Mates, 8-5
Standards for Dimensioning, 3-8
Aligned Dimension, 3-9
Angular Dimension, 3-9
Chamfer Dimension, 3-10
Cylindrical Dimension, 3-13
Linear Dimension, 3-8
Simple Hole Dimension, 3-11
Slot Dimension, 3-10
Stagger Dimension, 3-8
Start a SOLIDWORKS Session, 4-4
Sub-assembly, 8-4
Suppress, 8-10
Swept Base Feature, 7-4, 7-5
Swept Path, 7-5
Swept Profile, 7-4
SWITCH Part, 7-8
SWITCH Part – Loft Base Feature, 7-11
SWITCH Part – Shape Feature, 7-12
INDEX-7Index Engineering Graphics with SOLIDWORKS 2021
System Feedback icon, 4-18
Dimension, 4-18
Edge, 4-18
Face, 4-18
Vertex, 4-18
System Options, 5-4
Document Templates, 5-4
T
Tangent Arc Sketch tool, 7-44, 7-54
Tangent Edge Visible, 9-20
Tangent Geometric Relation, 7-10
Task Pane, 4-29
Appearances, Scenes, Decals, 4-31
Custom Properties, 4-32
Design Library, 4-30
File Explorer, 4-30
SOLIDWORKS Resources, 4-29
View Palette, 4-31
Templatestab, 4-10
Temporary Axes, 6-22, 6-29
Third Angle Projection, 1-31,1-33, 9-40
Thread – Major Diameter, 3-38
Thread Class of Fit, 3-42
Class 1, 3-42
Class 2, 3-42
Class 3, 3-42
Title Block – General Tolerance, 3-27
Title Block, 9-7
Tolerance, 3-26
Bilateral, 3-29
Dimension, 3-27
Drawing, 3-27
Limits, 3-28
Title Block, 3-27
Unilateral, 3-29
Note, 9-9
Tolerance Types, 3-28
Bilateral, 3-29
Limit, 3-28
Unilateral, 3-29
Top View, 1-31
Transferring Dimensions – Projection
Lines, 1-35
Transition Fit, 3-32, 3-33
Transparency, 6-17
Trim Entities Sketch tool, 6-27, 7-30
Trimetric Projection, 2-3, 2-5
Triple Thread, 3-41
T-square, 1-5
Tutorial tab, 4-10
Two View Drawing, 2-14
U
U.S. ANSI – Dimensioning System, 3-4
Unified National Screw Thread Series,
UN – 3-41
Unified National Screw Thread Series,
UNC – 3-41
Unified National Screw Thread Series,
UNRC – 3-41
Unified National Screw Thread Series,
UNRF – 3-41
Unilateral Tolerance, 3-29
Union – Boolean Operation, 2-29
Units – IPS, 5-6
Units – MMGS, 5-7
Units, 5-6, 5-7
Up To Surface End Condition, 7-48
V
Vanishing Point, 2-11
Vertex point, 7-52
Vertical Geometric relation, 7-47
View Layout tab, 9-16
View Orientation, 4-20
Back, 4-20
Bottom, 4-20
Dimetric, 4-20
Four view, 4-20
Front, 4-20
Isometric, 4-20
Left, 4-20
Right, 4-20
Single view, 4-20
Top, 4-20
Trimetric, 4-20
Two view, 4-20
View Palette, 4-31,9-15, 9-16, 9-34
View Sketch Relations, 6-20
Visible Lines, 1-17,1-23
W
Width Dimension, 1-35
Wireframe, 4-20
X&Y&Z
X,-Y Plane, 1-7
X,-Y,-Z Plane, 1-8
Zoom to Area, 4-19
Zoom to Fit, 4-15
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
تحميل
يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول