محاضرة بعنوان Design Mold

محاضرة بعنوان  Design Mold
اسم المؤلف
Bahan Kuliah
التاريخ
15 سبتمبر 2019
المشاهدات
التقييم
(لا توجد تقييمات)
Loading...

محاضرة بعنوان
Design Mold
Bahan Kuliah
Injection Products
Injection Molding
Clamping Unit
Plastic Material for the Injection Process
Shrinkage of ingredients (Shrinkage)
Amorphous Shrinkage vs. Semi crystalline
Reinforced vs unreinforced
Shrinkage of ingredients (Shrinkage)
Shrinkage value of some ingredients
Shrinkage vs Process Parameters
Product Design Aspects
Wall thickness
Radius at an angle
Ribs
Boss and hole
Undercuts
Injection vs Molding Machine
Mold Construction
Basic principles
Standard elements
Sprue Bush
Sprue Puller
Cavity amount
Gate Design
Ejector
Mold Design for Undercut
Mold Slider
Mold with slider
Split Molds
Mold with core puller
For long opening steps
Products with internal thread
Internal thread
Release with Rotating Core
Thread removal with Rotating Core
Collapsible Core
Mold Cost Savings by changing part design (No Slider)
Mold Temperature Control
Mold Ventilation
Mold Multi-Component Part
Injection Molding Sandwiches
Intervall Injection Molding
Core-Back Process
2-K-Overmoulding
2-K-Overmoulding Turning Unit
2K Injection Mold
Garden watering gun
Turning Stack Mold (Turning Cube)
Stack Mold with Turning Cube: 90 ° rotation
The basis of turning cube
2-K Overmoulding
Vertical turning axis
2K Injection Molding with middle plate rotation
3-K Overmoulding
4-K Overmoulding
3-Stop for 2K round 120 °
3-Stop 2K-Mold
120 ° rotation release station
Assembly Molding
double index plate technology
Back molding from film and woven fabric
Produk Injeksi
Injection Molding
Clamping Unit
Bahan Plastik Untuk Proses Injeksi
Penyusutan Bahan (Shrinkage)
Penyusutan Amorphous vs Semi kristal
Reinforced vs unreinforced
Penyusutan Bahan (Shrinkage)
Nilai shrinkage beberapa bahan
Shrinkage vs Parameter Proses
Aspek Desain Produk
Ketebalan dinding
Radius pada sudut
Ribs
Boss dan lubang
Undercuts
Mesin Injeksi vs Mold
Konstruksi Mold
Prinsip Dasar
Elemen-elemen standard
Sprue Bush
Sprue Puller
Jumlah Cavity
Desain Gate
Ejector
Desain Mold Untuk Undercut
Slider Mould
Mold dengan slider
Split Moulds
Mold dengan penarik inti
Untuk langkah bukaan panjang
Produk dengan ulir dalam
Ulir dalam
Pelepasan dengan Rotating Core
Pelepasan ulir dengan Rotating Core
Collapsible Core
Penghematan Biaya mould dengan perubahan desain part (Tanpa Slider)
Pengendalian Suhu Mold
Ventilasi Mold
Mould Multi-Component Part
Sandwich Injection Moulding
Intervall Injection Moulding
Core-Back Process
2-K-Overmoulding
Unit Pemutar 2-K-Overmoulding
2K Injection Mould
Pistol penyiram taman
Turning Stack Mould (Turning Cube)
Stack Mould dengan Turning Cube : putaran 90°
Dasar dari turning cube
2-K Overmoulding
Sumbu putar Vertikal
2K Injection Moulding dengan putaran middle plate
3-K Overmoulding
4-K Overmoulding
3-Pemberhentian untuk 2K putaran 120°
3-Stop 2K-Mould
putaran 120° Stasiun pelepasan
Assembly Moulding
double index plate technology
Back moulding dari film dan kain woven
كلمة سر فك الضغط : books-world.net

The Unzip Password : books-world.net

تحميل

يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول

التعليقات

اترك تعليقاً