كورس تعليم أساسيات برنامج أوتوديسك أنفنتور – Autodesk Inventor Essential Training Course

اسم المؤلف

غير معروف

التاريخ

11 مايو 2023

التصنيف

برامج هندسية, هندسة الإنتاج والتصميم الميكانيكى

المشاهدات

209

التقييم

(لا توجد تقييمات)

Loading...

التحميل

اضغط هنا للتحميل

كورس تعليم أساسيات برنامج أوتوديسك أنفنتور
Autodesk Inventor Essential Training Course

0. Introduction \ 01 – Design products with Autodesk Inventor
1. Introduction \ 02 – Use the exercise files
2. Introduction \ 03 – Certification overview
3. Basic Concepts \ 04 – Explore major workflow steps
4. Basic Concepts \ 05 – Home dashboard
5. Basic Concepts \ 06 – Review different file types
6. Leverage the Project \ 07 – Create a practice project
7. Leverage the Project \ 08 – Set up the exercise files project file
8. Navigate the Interface \ 09 – Navigate using the ViewCube
9. Navigate the Interface \ 10 – Navigate using the navigation tools
10. Navigate the Interface \ 11 – Use the browser and right-click menu
11. Sketch Concepts \ 12 – Introduce sketching
12. Sketch Concepts \ 13 – Work with origin geometry
13. Sketch Concepts \ 14 – Understand constraints
14. Create Sketch Geometry \ 15 – Draw lines
15. Create Sketch Geometry \ 16 – Create rectangles and arcs
16. Create Sketch Geometry \ 17 – Create splines
17. Create Sketch Geometry \ 18 – Construction geometry
18. Create Sketch Geometry \ 19 – Dimensioning
19. Create Sketch Geometry \ 20 – Parameters
20. Modify Sketch Geometry \ 21 – Extend and trim sketch geometry
21. Modify Sketch Geometry \ 22 – Offset sketch geometry
22. Modify Sketch Geometry \ 23 – Pattern and mirror sketch geometry
23. Work Features and Projections \ 24 – Understand work features
24. Work Features and Projections \ 25 – Create offset work planes
25. Work Features and Projections \ 26 – Create additional types of work planes
26. Work Features and Projections \ 27 – Create a work point and work axis
27. Work Features and Projections \ 28 – Project geometry
28. Understand Part Modeling \ 29 – Part feature introduction
29. Understand Part Modeling \ 30 – Create a base extrusion
30. Understand Part Modeling \ 31 – Create an extrusion to next face
31. Understand Part Modeling \ 32 – Create revolves
32. Understand Part Modeling \ 33 – Create a sweep
33. Understand Part Modeling \ 34 – Complex shapes with the Loft tool
34. Build Parts with Placed Features \ 35 – Add concentric holes
35. Build Parts with Placed Features \ 36 – Add linear holes
36. Build Parts with Placed Features \ 37 – Add threaded holes
37. Build Parts with Placed Features \ 38 – Modify edges with fillets and chamfers
38. Build Parts with Placed Features \ 39 – Hollow a part with the shell feature
39. Create Patterns of Features \ 40 – Create rectangular feature patterns
40. Create Patterns of Features \ 41 – Create circular patterns
41. Create Patterns of Features \ 42 – Mirror part features
42. Add Parts to an Assembly File \ 43 – Introduction to assemblies
43. Add Parts to an Assembly File \ 44 – Place components
44. Add Parts to an Assembly File \ 45 – Create and edit components in an assembly
45. Use Constraints to Position Parts \ 46 – Mate and Flush constraint
46. Use Constraints to Position Parts \ 47 – Angle constraint
47. Use Constraints to Position Parts \ 48 – Insert constraint
48. Use Constraints to Position Parts \ 49 – Drive constraints
49. Create Drawing Views \ 50 – Explore initial drawing creation
50. Create Drawing Views \ 51 – Place base and projected views
51. Create Drawing Views \ 52 – Create section views
52. Create Drawing Views \ 53 – Create detail views
53. Create Basic Annotations \ 54 – Create general dimensions
54. Create Basic Annotations \ 55 – Change dimension precision
55. Create Basic Annotations \ 56 – Create baseline, ordinate, and chain dimensions
56. Conclusion \ 57 – Next steps

كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net