Loading...Ansys Tutorial – Modelling and Analysing Composite Model in Ansys Software
Armin Yousefi Kanani
Mechanical Engineer
Contents
1- ACP introduction (Modeling simple composite plate): 3
2- Creating Shell Pipe with Composite Material: .4
3- Draping in Composite Model .5
4- Using Rules Tools in ACP .6
5- Modelling Composite T-beam in ACP .7
6- Stress Analysis of Composite T-beam 8
7- Eigenvalue Simulation on simple composite plate 9
8- Natural Frequencies and Mode Shape of Composite Plate with Hole 10
9- Determining the harmonic response of a fixed-fixed Composite Beam 11
10- Creating Shell Honeycomb model by Using Honeycombcreator Extension .12
12- Stress Analysis of Pressure Vessel (Solid modeling): 14
13- Reinforced Beam with Combination of Steel and Composite Material .15
14- Find the Best Laminate Configuration of a Composite Tube under compressive load:
15- Modeling Lug in ACP (complex geometry): 17
16- Tensile Test: .18
17- Determining the Fatigue Behavior of Composite Tensile Specimen: .19
18- Finding 5 Natural Frequencies and Mode Shape for Pre-stressed Composite Wing .
19- Investigating Mode I with Interface Elements (Delamination): 21
20- Modeling Progressive Damage for Composite Plate: .22
Future works:
1- Debonding between composite layers
2- Single lap joint
3- Composite tube under quasi-load by using ls-dyna
4- Impact test of composite material by using ls-dyna
5- Bird strike on composite wing
6- Crash test on composite model
7- Creating rotor model with composite material in ACP
8- Cure simulation of composite material
9- Using n-code life tools with ACP in ANSYS
كلمة سر فك الضغط : books-world.net
The Unzip Password : books-world.net
تحميل
يجب عليك التسجيل في الموقع لكي تتمكن من التحميل
تسجيل | تسجيل الدخول
